2in lift is on. Thanks to all those who answered my questions!
08-06-2011, 10:38 AM
#1
Registered User
Thread Starter
Join Date: Jul 2011
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
2in lift is on. Thanks to all those who answered my questions!
Started about 6 got it finished about 11. Ball joint spacers, pro comp shocks and aal. I don't think I did to bad considering I had never done anything like this. She rides good drives good but I am having problems getting the camber right. I took it to a shop and they got it in the green but it still looks off. Like I said it drives ok but the camber looks off. Anybody else have a similar experience?
08-06-2011, 10:44 AM
#3
Some tips below:
- http://www.4crawler.com/4x4/ForSale/...GetAnAlignment
Might try lowering the front a little and re-check the camber or try a different shop.
- http://www.4crawler.com/4x4/ForSale/...GetAnAlignment
Might try lowering the front a little and re-check the camber or try a different shop.
08-06-2011, 10:49 AM
#4
Registered User
Thread Starter
Join Date: Jul 2011
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
I thought about relaxing the t bars. I might look into that but I really don't have a clue to do it. And I did have an alignment done and they took alot of camber out but it's still off on one side. Sence it's only off on one side does that throw a red flag to anybody for a T bar adjustment? And as for the pic request.....I don't even have a digital camera. Sorry guys. But I'll see what I can do.
08-06-2011, 11:04 AM
#6
Torsion bar adj:
- http://www.4crawler.com/4x4/ForSale/...nBarAdjustment
Might be that one side is a little bent, sub-frame or control arm, putting it a little out of whack.
- http://www.4crawler.com/4x4/ForSale/...nBarAdjustment
Might be that one side is a little bent, sub-frame or control arm, putting it a little out of whack.
Thread
Thread Starter
Forum
Replies
Last Post
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM
rushw
General Electrical & Lighting Related Topics
4
07-18-2015 01:46 PM
