22re torque specs
#1
Registered User
Thread Starter
Join Date: Apr 2007
Location: Milton-Freewater Oregon
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
22re torque specs
I was wondering if anyone had a FSM for a 87 4runner 22re I tried downloading a couple with no success. I needed torque specs for
head
rods
mains
timing cover
rear main seal
cam
timing gear
crank pully bolt
clutch
thanks for any help I only have my next 2 days off to put this back together and drop the motor back in.
head
rods
mains
timing cover
rear main seal
cam
timing gear
crank pully bolt
clutch
thanks for any help I only have my next 2 days off to put this back together and drop the motor back in.
#3
Registered User
Thread Starter
Join Date: Apr 2007
Location: Milton-Freewater Oregon
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
I did find some on here but for some reason my computer wont load them. I also found some on ttora and they kept sending me to a error page
#6
Registered User
iTrader: (8)
Join Date: May 2011
Location: Southeast Virginia
Posts: 1,510
Likes: 0
Received 346 Likes
on
215 Posts
Head bolts - 65 ft/lbs
Rods - 51 ft/lbs
Mains - 76 ft/lbs
Timing cover - 6mm bolts - 8 ft/lbs, 8mm bolts - 15 ft/lbs, 10mm bolts - 25 ft/lbs
Rear main seal housing - 15 ft/lbs
Cam bearing caps - 15 ft/lbs
Cam pulley bolt - 58 ft/lbs
Crank pully bolt - 116 ft/lbs
Flywheel to crank - 65 ft/lbs
Pressure plate to flywheel - 15 ft/lbs
A Clymer manual from Advance Auto Parts is around $20-25 and will have torque specs as well. Don't forget to torque head bolts in the correct sequence. Both manuals have this sequence.
Rods - 51 ft/lbs
Mains - 76 ft/lbs
Timing cover - 6mm bolts - 8 ft/lbs, 8mm bolts - 15 ft/lbs, 10mm bolts - 25 ft/lbs
Rear main seal housing - 15 ft/lbs
Cam bearing caps - 15 ft/lbs
Cam pulley bolt - 58 ft/lbs
Crank pully bolt - 116 ft/lbs
Flywheel to crank - 65 ft/lbs
Pressure plate to flywheel - 15 ft/lbs
A Clymer manual from Advance Auto Parts is around $20-25 and will have torque specs as well. Don't forget to torque head bolts in the correct sequence. Both manuals have this sequence.
The following users liked this post:
James M. Beauchamp (03-02-2022)
#7
Registered User
Thread Starter
Join Date: Apr 2007
Location: Milton-Freewater Oregon
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
yeah I really dont know much about computers so I could not tell you if I had that program or not I will have to get my brother over here to help LOL. engnbldr just told me that the chilton/hayes are not to trustworthy so I was just trying to see if someone had the FSM or had the specs from that writen down need to get this thing going 2 carseats in a single cab 1st get pickup just is not working
Trending Topics
#9
Registered User
Join Date: Jan 2011
Location: North Carolina
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Head bolts - 65 ft/lbs
Rods - 51 ft/lbs
Mains - 76 ft/lbs
Timing cover - 6mm bolts - 8 ft/lbs, 8mm bolts - 15 ft/lbs, 10mm bolts - 25 ft/lbs
Rear main seal housing - 15 ft/lbs
Cam bearing caps - 15 ft/lbs
Cam pulley bolt - 58 ft/lbs
Crank pully bolt - 116 ft/lbs
Flywheel to crank - 65 ft/lbs
Pressure plate to flywheel - 15 ft/lbs
A Clymer manual from Advance Auto Parts is around $20-25 and will have torque specs as well. Don't forget to torque head bolts in the correct sequence. Both manuals have this sequence.
Rods - 51 ft/lbs
Mains - 76 ft/lbs
Timing cover - 6mm bolts - 8 ft/lbs, 8mm bolts - 15 ft/lbs, 10mm bolts - 25 ft/lbs
Rear main seal housing - 15 ft/lbs
Cam bearing caps - 15 ft/lbs
Cam pulley bolt - 58 ft/lbs
Crank pully bolt - 116 ft/lbs
Flywheel to crank - 65 ft/lbs
Pressure plate to flywheel - 15 ft/lbs
A Clymer manual from Advance Auto Parts is around $20-25 and will have torque specs as well. Don't forget to torque head bolts in the correct sequence. Both manuals have this sequence.
#10
#11
Registered User
You definitley didnt get those numbers out of the FSM. Most of the specs you listed are plain wrong. If you don't remember the source does that mean you just posted them from memory? That might explain the inaccuracies, if not then throw the Clymer manual in the trash.
#13
Registered User
iTrader: (8)
Join Date: May 2011
Location: Southeast Virginia
Posts: 1,510
Likes: 0
Received 346 Likes
on
215 Posts
I don't want to lose all my credibility, so here's the corrected values. I guess my memory isn't as good as I thought. The one difference I'm going to stand by is 65 on the head bolts vs. 58 listed in the FSM.
Head bolts - 65 ft-lbs
Rods - 51 ft-lbs
Mains - 76 ft-lbs
Timing cover - 8mm bolts - 9 ft-lbs, 10mm bolts - 29 ft-lbs
Rear main seal housing - 9 ft-lbs
Cam bearing caps - 14 ft-lbs
Cam pulley bolt - 58 ft-lbs
Crank pulley bolt - 116 ft-lbs
Flywheel to crank - 80 ft-lbs
Pressure plate to flywheel - 14 ft-lbs
Head bolts - 65 ft-lbs
Rods - 51 ft-lbs
Mains - 76 ft-lbs
Timing cover - 8mm bolts - 9 ft-lbs, 10mm bolts - 29 ft-lbs
Rear main seal housing - 9 ft-lbs
Cam bearing caps - 14 ft-lbs
Cam pulley bolt - 58 ft-lbs
Crank pulley bolt - 116 ft-lbs
Flywheel to crank - 80 ft-lbs
Pressure plate to flywheel - 14 ft-lbs
Thread
Thread Starter
Forum
Replies
Last Post
Blamalam
86-95 Trucks & 4Runners
22
03-12-2022 07:34 AM