1 gen 4runner help needed.
#1
Registered User
Thread Starter
Join Date: Nov 2005
Location: louisville kentucky
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
1 gen 4runner help needed.
Ok folks here's the story. I bought my 4runner a few years back and it had the rear seat delete. Well I needed a backseat so I traded the panel for a full set of 88 seats. At least that's what I remember the guy telling me. I have since tracked down seat belts but I need the locking pin for the back rest of the seat. Can anybody take a picture of there's and post it on here? I need something to go off to make one. Or has some one run into this issue before and found a bolt that will work.
Here is a picture of the catch on the seat.
And here is the truck.
Here is a picture of the catch on the seat.
And here is the truck.
#2
Registered User
This is the hardware the seats lock in to:
This photo shows the rear seats out of a newer 4Runner, so it doesn't show how the latching mechanism lines up.
source: http://www.pirate4x4.com/forum/toyot...ear-seats.html
This photo shows the rear seats out of a newer 4Runner, so it doesn't show how the latching mechanism lines up.
source: http://www.pirate4x4.com/forum/toyot...ear-seats.html
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
tpd143
General Vehicle Related Topics (Non Year Related)
1
07-07-2015 09:06 AM