need help with 3rd hand project

usmcrob6 · 11-04-2009, 01:44 AM

so i have a 84 toyota sr5 pickup i got 3rd hand it had a blown head gasket so they decided to rebuild the whole motor i guess it was bad so they were going to just do a swap but the motor they bought to put in had a blown head gasket as well so they bought a 3rd motor as parts well turns out they got most of it done but they put an 85 head on a 84 block so the exhaust ports are different. but i got that taken care of but what i cant seem to find is the piece that goes between the intake ports i have a pic of where it goes but i am not sure what it looks like tho i know it is for the cooling system, but not sure what it looks like.could some one post a pic of what it looks like for me i am sure i have one some where just dont know what i am looking for.

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

usmcrob6 · 11-04-2009, 01:45 AM

o ya and i forgot to say this is not a pic of my engine just one someone sent me on a different forum

tmcorbin · 11-04-2009, 03:00 AM

Sorry man I'm 85 and up, have you tried to down load the factory service manual. I dont have the link but they are on here.

Where are you located, I'm at Cherry Point.

usmcrob6 · 11-04-2009, 03:10 AM

well its an 85 head so ya lol well anyone go a pic of that piece

toyotabull · 11-04-2009, 04:50 AM

here is a pic from the bottom of the 20R head, the same as you have pictured

toyotabull · 11-04-2009, 04:52 AM

usmcrob6 · 11-04-2009, 08:22 PM

ya that hose that is coming from between the intake port i went to pick and pull and picked one up today as well as the bolts i needed now all i need to finish it that i can think of is the tail gate latch

usmcrob6 · 11-06-2009, 11:06 PM

ok so i put it on and i am not sure how it connects to the other side of the block to the to the heater core hose also not sure what bolts into this exhaust pipe the comes from the exhaust manifold around the back of the block and stops it has to bolt to something. i will take and post a pic tomorrow

11-04-2009, 03:00 AM	#3 (permalink)
tmcorbin Registered User Join Date: Jul 2009 Location: Eastern NC Posts: 149	Sorry man I'm 85 and up, have you tried to down load the factory service manual. I dont have the link but they are on here. Where are you located, I'm at Cherry Point. __________________ 85 4runner 22re, 170K, clean and straight. Still working through 20 years of scheduled maint. Future plans, engbldr street RV head, cam and OS valves, engbldr over haul kit, Marlin Crawler trany rebuild kit, T-case rebuild, 2" lift, interior, repaint. Currently 20mpg, Sound great, using 1qt of oil every two days.

11-04-2009, 04:50 AM	#5 (permalink)
toyotabull Registered User Join Date: Oct 2009 Location: Natchitoches, La Posts: 74	here is a pic from the bottom of the 20R head, the same as you have pictured __________________ 85 toyota rancho lift 33 in tires on 15X8 steel 270 lift cam and flat tops Those who do not learn from history are doomed to repeat it, or they're showing up their friends. Again!

11-04-2009, 04:52 AM	#6 (permalink)
toyotabull Registered User Join Date: Oct 2009 Location: Natchitoches, La Posts: 74	__________________ 85 toyota rancho lift 33 in tires on 15X8 steel 270 lift cam and flat tops Those who do not learn from history are doomed to repeat it, or they're showing up their friends. Again!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

11-04-2009, 01:45 AM	#2 (permalink)
usmcrob6 Registered User Join Date: Nov 2009 Posts: 5	o ya and i forgot to say this is not a pic of my engine just one someone sent me on a different forum

11-04-2009, 03:10 AM	#4 (permalink)
usmcrob6 Registered User Join Date: Nov 2009 Posts: 5	well its an 85 head so ya lol well anyone go a pic of that piece

11-04-2009, 08:22 PM	#7 (permalink)
usmcrob6 Registered User Join Date: Nov 2009 Posts: 5	ya that hose that is coming from between the intake port i went to pick and pull and picked one up today as well as the bolts i needed now all i need to finish it that i can think of is the tail gate latch

11-06-2009, 11:06 PM	#8 (permalink)
usmcrob6 Registered User Join Date: Nov 2009 Posts: 5	ok so i put it on and i am not sure how it connects to the other side of the block to the to the heater core hose also not sure what bolts into this exhaust pipe the comes from the exhaust manifold around the back of the block and stops it has to bolt to something. i will take and post a pic tomorrow