yotatillar82

does anyone know which parts ill need to do a crossover steering on my 82 toyota? Ive been told that ill need a 4WD steering box from an IFS truck. Can I also use the tie rods or do I need special ones made? I currently have manual steering and it blows!

kyle_22r

you need a crossover kit, don't screw around with welding stock arms and wimpy IFS tie rods. marlin sells a forged kit for a great price.

__________________
1998 tacoma, 3RZ-FE, 5 speed, 30x9.5R15 M/Ts

past toys:
1984 4x2
1979 4x4
1991 4x4

fourwd1

You'll need a steering gear box from an IFS truck. If you want to convert to PS you'll need everything for that too (pump and mtg brkts, resevoir, hoses, belt, maybe a new pulley).

Also a hi-steer kit (All Pro, Marlin, Sky, etc.).

All of the stock push-pull steering gets tossed.

__________________
- - As seen in FOUR WHEELEER magazine July 2006, OFF-ROAD magazine Feb 2007 - -

'84 4Runner SR5 - ARBed 5.29s F&R, 4.7 t-case, drv train lift, Chevys, hi-steer, 30 spl Longs

'80 something Toy P/U, Buick 231 V6, Holley 4 bbl, Weiand intake, Downey headers, custom TH350 L/U w/700R4 low gearset, dual tanks, dual batterys

yotatillar82

thanks fourwd1 i was wondering exactly what id need and that cleared everything up for me

Beast

Marlincrawler.com

__________________
Beast started out as an 81' now W/ 7mgte, w56, 2nd gen rearend, centerforce DF, FX bucket seats, Beast bumpers front and rear, reinforced frame, custom steel grill, custom quad headlights, four 165 watt KC daylighters on double tube roll bar, eight speaker stereo,