FS[PacSouthWest]: Old Man Emu Shocks Springs Torsion Bar, 1990-95 4Runner, SF Bay Area, $600
#1
Registered User
Thread Starter
Join Date: Jun 2006
Location: SF Bay Area
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Old Man Emu Shocks Springs Torsion Bar, 1990-95 4Runner, SF Bay Area, $600
I have a set of Old Man Emu suspension gear I never installed on my 1991 4Runner. Will fit 1990-1995.
Location: San Francisco, CA
Price: $600
All parts are in the boxes. I will NOT ship so please pick up locally.
1 ARB 303003 TORSION BAR HILUX ALL
2 ARB N98 IFS 4RUNNER/PU FRONT SHOCK
1 ARB 2900 OLD MAN EMU COILS SP RINGS 2900
2 ARB N72F 89> REAR 4RUNNER SHOCK
1 ARB OMESD33 STEERING DAMPER
*removed link* These are not for a lift.
Coils are apparently Medium Duty.
All parts AS SHOWN. I pulled the exact text for the parts from my invoice. Sorry for all the confusion...
Location: San Francisco, CA
Price: $600
All parts are in the boxes. I will NOT ship so please pick up locally.
1 ARB 303003 TORSION BAR HILUX ALL
2 ARB N98 IFS 4RUNNER/PU FRONT SHOCK
1 ARB 2900 OLD MAN EMU COILS SP RINGS 2900
2 ARB N72F 89> REAR 4RUNNER SHOCK
1 ARB OMESD33 STEERING DAMPER
*removed link* These are not for a lift.
Coils are apparently Medium Duty.
All parts AS SHOWN. I pulled the exact text for the parts from my invoice. Sorry for all the confusion...
Last edited by choppe777; 09-03-2015 at 08:02 AM.
#5
Registered User
If the rear coils are #2900, they are medium duty.
The heavy duty version is #2901
I recently put a pair on my '95 Runner
Got a little lift, but I don't know about 2 inches.
Don't think I would like the heavy (#2901) version.
I think they only make one #torsion bar for the 2nd gen Runners.
The OME/ARB fitment page says that the heavy duty and medium duty springs give about the same unloaded ride hight. The heavy ones are just stiffer.
They say the heavy springs are for machines that carry 300+ pound loads all the time.
Here is the link to the fitment guide:
http://www.arbusa.com/Uploads/PDF/on...de_current.pdf
The heavy duty version is #2901
I recently put a pair on my '95 Runner
Got a little lift, but I don't know about 2 inches.
Don't think I would like the heavy (#2901) version.
I think they only make one #torsion bar for the 2nd gen Runners.
The OME/ARB fitment page says that the heavy duty and medium duty springs give about the same unloaded ride hight. The heavy ones are just stiffer.
They say the heavy springs are for machines that carry 300+ pound loads all the time.
Here is the link to the fitment guide:
http://www.arbusa.com/Uploads/PDF/on...de_current.pdf
#6
I have a set of Old Man Emu suspension gear I never installed on my 1991 4Runner. Will fit 1990-1995. Location: San Francisco, CA Price: $600 All parts are in the boxes. I will NOT ship so please pick up locally. 1 ARB 303003 TORSION BAR HILUX ALL 2 ARB N98 IFS 4RUNNER/PU FRONT SHOCK 1 ARB 2900 OLD MAN EMU COILS SP RINGS 2900 2 ARB N72F 89> REAR 4RUNNER SHOCK 1 ARB OMESD33 STEERING DAMPER *removed link* These are not for a lift. Coils are apparently Medium Duty. All parts AS SHOWN. I pulled the exact text for the parts from my invoice. Sorry for all the confusion...
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[SouthEast]: 1st Gen 4Runner Slider Window, Driver Side
coryc85
Misc Stuff (Vehicle Related)
0
07-06-2015 04:07 AM