FS: 3rd gen painted rear bumper

Albuquerque Jim · 06-12-2006, 09:27 PM

My bumper is off and up for sale. It is off of a Millenium Silver 2000 4Runner. I also have an extra set of bumper-ettes because I was planning to replace the damaged driver's side and never got around to it before I decided to go with a custom steel bumper.

Parts:
1 Silver Driver Side Bumper-ette (damaged) FREE
1 Silver Passenger Side Bumper-ette (great shape)
1 Silver Center Section (great shape)
1 Plastic Center Thing
1 Silver Driver Side Mud Flap (good shape)
1 Silver Passenger Side Mud Flap (fair shape)
All Hardwhare

Extra Parts:
1 Green Driver Side Bumper-ette (good shape)
1 Green Passenger Side Bumper-ette (fair shape)
1 Silver Driver Side Mud Flap (damaged) FREE

Other Bumper Related Stuff:
1 OEM Trailer Hitch
1 Moab Bar (rear protection I wheeled with for 2 years, a 1" BL is necessary)

I will sell everything for $200. I will take offers on individual parts. I will send photos upon request.

Here is a good photo showing the damage to the Driver Side Bumper-ette and how nice the center section is. This pic also shows what I refer to as my Moab Bar (a 2"x2"x1/4" square tube that mounts to the hitch location). The Moab Bar was added the day before my first trip to Moab a few years ago because I knew I was planning to cross the Golden Crack. It has worked flawlessly, this bar has gotten my rear end through many difficult trails. You would be surprised.

AZ4ME · 06-13-2006, 10:02 AM

I'll take the silver PS Bumper-ette and the plastic bumper top trim. Let me know how much you want and I'll pick them up when I see you for the NM trip in a couple of weeks.

RTdawgs · 06-13-2006, 10:10 AM

Great idea for Moab bar!

Albuquerque Jim · 06-13-2006, 10:24 AM

Quote:

Originally Posted by AZ4ME

I'll take the silver PS Bumper-ette and the plastic bumper top trim. Let me know how much you want and I'll pick them up when I see you for the NM trip in a couple of weeks.

OK

Quote:

Originally Posted by RTdawgs

Great idea for Moab bar!

Want it?

RTdawgs · 06-13-2006, 11:04 AM

Quote:

Originally Posted by Albuquerque Jim

OK

Want it?

Nope. I am going to do something similar though. I was only commenting on your imagination.

Albuquerque Jim · 06-13-2006, 11:07 AM

Quote:

Originally Posted by RTdawgs

Nope. I am going to do something similar though. I was only commenting on your imagination.

Trust me, it has saved my OEM bumper many times. If I were to do it again I would take the time to build it around the sides though. As you see in the pic above, the sides are still unprotected.

WHORERUNNER · 06-13-2006, 08:03 PM

pm'd you

Albuquerque Jim · 06-13-2006, 08:56 PM

It looks like both passenger side bumper-ettes are spoken for.

Who wants the rest?

kevin444 · 06-13-2006, 10:20 PM

do you still have the bumperettes? how much for the hitch? are you selling your flares?

Albuquerque Jim · 06-13-2006, 10:30 PM

Quote:

Originally Posted by kevin444

do you still have the bumperettes? how much for the hitch? are you selling your flares?

I still have a driver's side bumper-ette in good shape. No, I am not selling the flares. $40 plus shipping for the hitch (no hardware).

fireteacher · 06-14-2006, 04:09 AM

i want the drivers side mud flap!!!!! 60030

06-12-2006, 09:27 PM	#1 (permalink)
Albuquerque Jim Contributing Member Join Date: Apr 2003 Location: Albuquerque, NM Posts: 2,567	FS: 3rd gen painted rear bumper My bumper is off and up for sale. It is off of a Millenium Silver 2000 4Runner. I also have an extra set of bumper-ettes because I was planning to replace the damaged driver's side and never got around to it before I decided to go with a custom steel bumper. Parts: 1 Silver Driver Side Bumper-ette (damaged) FREE 1 Silver Passenger Side Bumper-ette (great shape) 1 Silver Center Section (great shape) 1 Plastic Center Thing 1 Silver Driver Side Mud Flap (good shape) 1 Silver Passenger Side Mud Flap (fair shape) All Hardwhare Extra Parts: 1 Green Driver Side Bumper-ette (good shape) 1 Green Passenger Side Bumper-ette (fair shape) 1 Silver Driver Side Mud Flap (damaged) FREE Other Bumper Related Stuff: 1 OEM Trailer Hitch 1 Moab Bar (rear protection I wheeled with for 2 years, a 1" BL is necessary) I will sell everything for $200. I will take offers on individual parts. I will send photos upon request. Here is a good photo showing the damage to the Driver Side Bumper-ette and how nice the center section is. This pic also shows what I refer to as my Moab Bar (a 2"x2"x1/4" square tube that mounts to the hitch location). The Moab Bar was added the day before my first trip to Moab a few years ago because I knew I was planning to cross the Golden Crack. It has worked flawlessly, this bar has gotten my rear end through many difficult trails. You would be surprised. __________________ '00 SR5, "Highlander" Dual Cases, Aisin Hubs, E-Lock'd, Cryo'd, Chromo'd, ARB'd, 315's, Sonoran Steel Bumper, Lift & UCA's, 4 Crawl 1" BL, Armored...etc. F-Toy #081 in progress Dual Cases, 30 Splines, 5.71's, E-lockers, Hydro-Assist, 37's, DOM Hendrix Chassis, 80Proof, ORS, Sonoran Steel...etc. Last edited by Albuquerque Jim : 06-13-2006 at 11:05 PM.

06-13-2006, 10:02 AM	#2 (permalink)
AZ4ME Registered User Join Date: May 2004 Location: PHX Posts: 440	I'll take the silver PS Bumper-ette and the plastic bumper top trim. Let me know how much you want and I'll pick them up when I see you for the NM trip in a couple of weeks. __________________ -Brian '88 4Runner '00 4Runner

06-13-2006, 10:10 AM	#3 (permalink)
RTdawgs Contributing Member Join Date: May 2002 Location: Athens, GA Posts: 2,073	Great idea for Moab bar! __________________ Ryan 2000 4Runner Taco/Tundra front, OME N86C/890 rear, 305/70R16 Dueler ATs ARB air locker, TJM T-15, Warn M8000 TrailCarnage skid plates and sliders TRD Supercharger Sold to an Alaskan expedition runner. 2003 Lexus GS300

06-13-2006, 08:56 PM	#8 (permalink)
Albuquerque Jim Contributing Member Join Date: Apr 2003 Location: Albuquerque, NM Posts: 2,567	It looks like both passenger side bumper-ettes are spoken for. Who wants the rest? __________________ '00 SR5, "Highlander" Dual Cases, Aisin Hubs, E-Lock'd, Cryo'd, Chromo'd, ARB'd, 315's, Sonoran Steel Bumper, Lift & UCA's, 4 Crawl 1" BL, Armored...etc. F-Toy #081 in progress Dual Cases, 30 Splines, 5.71's, E-lockers, Hydro-Assist, 37's, DOM Hendrix Chassis, 80Proof, ORS, Sonoran Steel...etc.

06-13-2006, 10:20 PM	#9 (permalink)
kevin444 Contributing Member Join Date: Jun 2004 Posts: 1,858	do you still have the bumperettes? how much for the hitch? are you selling your flares? __________________ 02 4runner conversion complete!

06-13-2006, 08:03 PM	#7 (permalink)
WHORERUNNER Registered User Join Date: Dec 2005 Location: St.Cloud,MN Posts: 121	pm'd you

06-14-2006, 04:09 AM	#11 (permalink)
fireteacher Contributing Member Join Date: Feb 2006 Location: Oahu, Hawaii Posts: 1,677	i want the drivers side mud flap!!!!! 60030 __________________ Shaun 99 limited 4runner 3.4L MODS: TJM-17/Sonoran shackle hangers/driving lights - DIFF Breather - Sliders - Cobra 19 ULTRA III cb and 3ft. Wilson ant - 265/75/16 Definity Dakota A/T - "SATOSHI MOD" - All Weather Mats - Locker Mod - Fog Light Mod - Vortex Classic Muffler My profile http://yotatech.com/showthread.php?t=96117

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS 3rd Gen Bumper Lights	shore_caster	Misc Stuff (Vehicle Related)	0	04-11-2007 11:46 PM
FS: 3rd Gen Rear Cargo Cover Tan	ecchamberlin	Misc Stuff (Vehicle Related)	8	02-07-2007 05:23 AM
How much show I pay to have 3rd gen bumper painted?	Jeff_M	95.5-2004 Tacomas & 96-2002 4Runners	5	03-27-2005 10:36 PM
FS Sonoran Steel Rear bumper for 3rd gen 4Runner	shazaam	95.5-2004 Tacomas & 96-2002 4Runners	0	09-13-2004 06:01 PM
3rd gen rear bumper	Hyperlite	North Carolina	15	02-25-2004 07:57 PM