Nice 1uz '93 4Runner for sale in AL

blackrunner91 · 08-11-2009, 07:00 AM

As much as I hate to do it, I guess I'm going to sell my 4Runner. I've worked hard on this thing over the past year and a half to complete the 1uz engine swap. I finished it back in May and I am very pleased with it, however I am unsure of my job situation in the next few months and I think I'd be better off selling it. It's only been wheeled 3 times and has zero rust on or under it. The paint on the truck looks good from a few feet away, but it has surface scratched and rock chips on it. Nice enough to drive everyday, but not too nice to take Offroad. It's exactly what I wanted. It was my brothers daily driver for about 4 years and then I bought it from him in Feb. Of last year and immediatly started the swap. It's got nice gray leather interior with no stains inside. The front seats were a little worn so we put Wet Okole seat covers in the front. On the outside, it has an ARB front bumper and custom 1(3/4)" rock sliders. I bought some 5-spoke '01 Limited wheels and had them powdercoated gloss black. The tires are brand new Goodyear Wrangler MT/Rs from Treadwright. I love those tires by the way and will continue to buy them in the future. I've never even aired them down and have gone everywhere I've ever wanted to with them. They are 285/75/16s. The 4Runner also has billet ball-joint spacers in the front and Land Cruiser coils in the rear. Also I had to install a 1" body lift for the engine swap. The engine is out of a '91 LS 400 and so is the transmission. I used the transfer case from my '91 4Runner and adapted it to the Lexus trans. The harness was built by Pheonix Tuning. It's got an aluminum radiator from BeCool. The exhaust is 2.25" off the manifolds back to a y-pipe turning into 3" and then through a stainless Magnatlow muffler. It sounds awesome. It has factory 4.88 gears in it also. I put manual hubs on it and used the axle tube off of another IFS axle I had and junked the ADD garbage. While I was in there, I welded the front VERY solid. This thing is very strong with the v8 and the front locked. It does very well. If anyone who buys it is interested I could build a rear bumper to match the sliders and ARB and take the factory chrome one off. I also have a Dana44 that I was going to put in it also so that could go with the truck too. Anyways, if interested you can email me at louisandellen@yahoo.com or pm me. I'm likely to answer email faster though. I'm asking $7000 and will consider partial trades. Especially for a four-stroke dirtbike or 4wheeler a couple years old.
Thanks
Louis

This ad is not displayed to registered members.
Register your free account today and become a member on Yotatech!

blackrunner91 · 08-11-2009, 07:02 AM

Sorry, I also forgot to mention that I would email pics.

**waskillywabbit** · 08-11-2009, 04:03 PM

You should really post some pics Louis.

blackrunner91 · 08-11-2009, 04:12 PM

Yeah, I just haven't figured out how to post them from my iphone.

blackrunner91 · 08-13-2009, 05:23 AM

I will consider all types of trades.

1styota4X4 · 08-13-2009, 10:11 AM

you have pm

blackrunner91 · 08-17-2009, 07:40 AM

still for sale.

olharleyman · 08-17-2009, 11:54 AM

Quote:

Originally Posted by blackrunner91

Yeah, I just haven't figured out how to post them from my iphone.

try photobucket I am not sure if it will work but it might

Cannon88 · 08-17-2009, 12:13 PM

Here you go Louis, very clean Runner.

^^^"In this pic, I haven't put the cover back on the steering column because the old one was cracked. Also, the brown on the floor is just a worn spot on the floor mat. - Louis"

blackrunner91 · 08-17-2009, 12:58 PM

Thanks for posting the pics Cannon.

Okiyota · 08-19-2009, 08:43 PM

Would you be interested? PM me your phone number if you are...

2005 KTM 525 SX with a 6spd! and LOTS of aftermarket parts. Runs great, very strong and fast . I am 6'6" tall and 205 lbs, this bike is set up very well for a larger rider and does not feel cramped. It could very easily be set back up for a shorter rider using some of the factory parts that i still have and are included with the sale.
Here is a list of all the parts on the bike...
Factory MXC 5th & 6th Gears, makes this thing great for any style/terrain of riding and has a perfect spread/pull in all gears
Enduro Engineering Skid Plate
Enduro Engineering Exhaust Heat Shield
Enduro Engineering Clutch Case Saver
Enduro Engineering Tall Soft Seat
Enduro Engineering Bar Risers
Enduro Engineering Light Kit (New Style Headlight/Tail Light from a 2007 300XCW and Wire Harness)
Enduro Engineering Rear Brake Switch
KTM Hard Parts Twin Air Filter
KTM Hard Parts Rim Decals
KTM Hard Parts Anodized Orange Clutch Reservoir Cover
KTM Hard Parts Orange Stealth Rear Sprocket (52 tooth)
KTM Hard Parts Fat Bar Pad
KTM Hard Parts Tubular Radiator Gaurds
Pro Taper Pillow Top Grips
Trail Tech Elctrical System (Stator, Flywheel, Regulator/Rectifier, Cover)
Langston Racing LRS-02 Progressive Springs (f&r)
Langston Racing Fork Bleeders
Pro Taper Pastrana FMX Bend Contour Fat Bars (121mm tall)
Pro Taper Oversize Bar Mounts
Pro Circuit T4 Silencer
R&D Accelerator Pump With Adjustable Leak Jet
STR Anodized Orange Fuel Adjustment Screw
Acerbis Rally II Handguards
Acerbis/Pro Taper Handguard Mounts
DID 520 Gold Chain (120 Links)
Maxxis Maxcross IT tires (80/100-21 & 120/90-19), only 5 rides on both tires, lots of tread left
Excel Takasago Black Rims
Factory EXC Battery Tray (and associated parts)
7 Series Battery
Pro Moto Billet Kick Stand
Still have some of the factory parts also...
Factory Seat
Extra Set Of Factory Wheels
Some extra plastics
Factory Rear Spring
Other Misc. Things That Will Be Included
I have been riding for 24 years and this is by far the best and my favorite bike i have ever owned!

These pics were taken Sunday, this is exactly as the bike is currently...

blackrunner91 · 08-20-2009, 02:23 AM

Sweet bike. Pm sent.

blackrunner91 · 08-22-2009, 12:55 PM

ttt, make offers.

blackrunner91 · 08-23-2009, 07:46 PM

back to the top.

blackrunner91 · 08-27-2009, 05:54 AM

someone make me an offer

soldiersnake · 08-28-2009, 01:18 PM

my quad and 2k cash when i get back in October.

blackrunner91 · 08-28-2009, 09:21 PM

We'll see if i've still got it when you get back. There are a few things in the works as we speak.

soldiersnake · 08-28-2009, 09:31 PM

Ok Louis, fair enough, its very nice BTW, the more i look at it the more I like it GL with sale!

RMA · 08-28-2009, 10:00 PM

Very Nice man.. Im just finishing up a swap of my own and love the new power . Hey just curious about your transfer case, are you using a hydraulic case , if so how are you controlling it .. using the 6 relays ..

blackrunner91 · 08-29-2009, 03:53 AM

No, I'm using the case from my 91 that has the manual style shifter. It has an adapter that you can unbolt from the trans after removing the case. I am using that adapter and case with the Lexus A341E.

RMA · 08-29-2009, 08:36 AM

THanks , sounds like the same thing im using . Good luck on the sale ..

blackrunner91 · 08-31-2009, 10:53 AM

To the top

Sonofmayhem · 08-31-2009, 03:42 PM

Quote:

Originally Posted by Okiyota

Would you be interested? PM me your phone number if you are...

2005 KTM 525 SX with a 6spd! and LOTS of aftermarket parts. Runs great, very strong and fast . I am 6'6" tall and 205 lbs, this bike is set up very well for a larger rider and does not feel cramped. It could very easily be set back up for a shorter rider using some of the factory parts that i still have and are included with the sale.
Here is a list of all the parts on the bike...
Factory MXC 5th & 6th Gears, makes this thing great for any style/terrain of riding and has a perfect spread/pull in all gears
Enduro Engineering Skid Plate
Enduro Engineering Exhaust Heat Shield
Enduro Engineering Clutch Case Saver
Enduro Engineering Tall Soft Seat
Enduro Engineering Bar Risers
Enduro Engineering Light Kit (New Style Headlight/Tail Light from a 2007 300XCW and Wire Harness)
Enduro Engineering Rear Brake Switch
KTM Hard Parts Twin Air Filter
KTM Hard Parts Rim Decals
KTM Hard Parts Anodized Orange Clutch Reservoir Cover
KTM Hard Parts Orange Stealth Rear Sprocket (52 tooth)
KTM Hard Parts Fat Bar Pad
KTM Hard Parts Tubular Radiator Gaurds
Pro Taper Pillow Top Grips
Trail Tech Elctrical System (Stator, Flywheel, Regulator/Rectifier, Cover)
Langston Racing LRS-02 Progressive Springs (f&r)
Langston Racing Fork Bleeders
Pro Taper Pastrana FMX Bend Contour Fat Bars (121mm tall)
Pro Taper Oversize Bar Mounts
Pro Circuit T4 Silencer
R&D Accelerator Pump With Adjustable Leak Jet
STR Anodized Orange Fuel Adjustment Screw
Acerbis Rally II Handguards
Acerbis/Pro Taper Handguard Mounts
DID 520 Gold Chain (120 Links)
Maxxis Maxcross IT tires (80/100-21 & 120/90-19), only 5 rides on both tires, lots of tread left
Excel Takasago Black Rims
Factory EXC Battery Tray (and associated parts)
7 Series Battery
Pro Moto Billet Kick Stand
Still have some of the factory parts also...
Factory Seat
Extra Set Of Factory Wheels
Some extra plastics
Factory Rear Spring
Other Misc. Things That Will Be Included
I have been riding for 24 years and this is by far the best and my favorite bike i have ever owned!

These pics were taken Sunday, this is exactly as the bike is currently...

Damn Tommy. Nice house

xcmountain80 · 08-31-2009, 03:46 PM

Man this is a nice rig as I've seen it run in person, and ohhh does it sound good.

A

blackrunner91 · 08-31-2009, 05:18 PM

Thanks man. Wish I could get a video on here somehow. I think everyone would like the sound.

08-11-2009, 07:02 AM	#2 (permalink)
blackrunner91 Registered User Join Date: Aug 2003 Location: Atlanta, GA or Florence, AL Posts: 238	Sorry, I also forgot to mention that I would email pics. __________________ '91 4Runner 22RE 4x4 project rock crawler...on hold '93 4Runner daily driver...1uz Lexus v8 swap. Next up, D44 swap

08-11-2009, 04:03 PM	#3 (permalink)
waskillywabbit Super Moderator-Sponsoring Member Staff Join Date: Jul 2003 Location: Tuscaloosa, AL Posts: 14,548	You should really post some pics Louis. __________________ WabFab Off-Road, LLC MySpace Twitter Facebook 7th Annual South East 4Runner Jamboree, 2010 The toughest part of a Jeep is the chick driving it. WabFab Off-Road 4th Anniversary Sale

08-11-2009, 04:12 PM	#4 (permalink)
blackrunner91 Registered User Join Date: Aug 2003 Location: Atlanta, GA or Florence, AL Posts: 238	Yeah, I just haven't figured out how to post them from my iphone. __________________ '91 4Runner 22RE 4x4 project rock crawler...on hold '93 4Runner daily driver...1uz Lexus v8 swap. Next up, D44 swap

08-13-2009, 05:23 AM	#5 (permalink)
blackrunner91 Registered User Join Date: Aug 2003 Location: Atlanta, GA or Florence, AL Posts: 238	I will consider all types of trades. __________________ '91 4Runner 22RE 4x4 project rock crawler...on hold '93 4Runner daily driver...1uz Lexus v8 swap. Next up, D44 swap

08-13-2009, 10:11 AM	#6 (permalink)
1styota4X4 Registered User Join Date: Nov 2005 Location: Dallas Texas Posts: 571	you have pm __________________ NEW* 1985 lifted locked dual cases bumpers and sliders now my daily! 1985 Stock Had to do head gasket and some other minor things left. 1983 Hilux 4X4 SR5 4 Sale 3" Rough Country Lift 32" Goodyear Wranglers. Custom bumpers being made!! 1995 4Runner 4X4 V6 SR5***TRADED

08-17-2009, 07:40 AM	#7 (permalink)
blackrunner91 Registered User Join Date: Aug 2003 Location: Atlanta, GA or Florence, AL Posts: 238	still for sale. __________________ '91 4Runner 22RE 4x4 project rock crawler...on hold '93 4Runner daily driver...1uz Lexus v8 swap. Next up, D44 swap

08-17-2009, 12:13 PM	#9 (permalink)
Cannon88 Registered User Join Date: Feb 2009 Location: Ft. Worth, TX Posts: 51	Here you go Louis, very clean Runner. ^^^"In this pic, I haven't put the cover back on the steering column because the old one was cracked. Also, the brown on the floor is just a worn spot on the floor mat. - Louis" Last edited by Cannon88; 08-17-2009 at 12:48 PM.

08-17-2009, 12:58 PM	#10 (permalink)
blackrunner91 Registered User Join Date: Aug 2003 Location: Atlanta, GA or Florence, AL Posts: 238	Thanks for posting the pics Cannon. __________________ '91 4Runner 22RE 4x4 project rock crawler...on hold '93 4Runner daily driver...1uz Lexus v8 swap. Next up, D44 swap

08-19-2009, 08:43 PM	#11 (permalink)
Okiyota Registered User Join Date: Jan 2006 Location: Colorado Springs Posts: 123	Would you be interested? PM me your phone number if you are... 2005 KTM 525 SX with a 6spd! and LOTS of aftermarket parts. Runs great, very strong and fast . I am 6'6" tall and 205 lbs, this bike is set up very well for a larger rider and does not feel cramped. It could very easily be set back up for a shorter rider using some of the factory parts that i still have and are included with the sale. Here is a list of all the parts on the bike... Factory MXC 5th & 6th Gears, makes this thing great for any style/terrain of riding and has a perfect spread/pull in all gears Enduro Engineering Skid Plate Enduro Engineering Exhaust Heat Shield Enduro Engineering Clutch Case Saver Enduro Engineering Tall Soft Seat Enduro Engineering Bar Risers Enduro Engineering Light Kit (New Style Headlight/Tail Light from a 2007 300XCW and Wire Harness) Enduro Engineering Rear Brake Switch KTM Hard Parts Twin Air Filter KTM Hard Parts Rim Decals KTM Hard Parts Anodized Orange Clutch Reservoir Cover KTM Hard Parts Orange Stealth Rear Sprocket (52 tooth) KTM Hard Parts Fat Bar Pad KTM Hard Parts Tubular Radiator Gaurds Pro Taper Pillow Top Grips Trail Tech Elctrical System (Stator, Flywheel, Regulator/Rectifier, Cover) Langston Racing LRS-02 Progressive Springs (f&r) Langston Racing Fork Bleeders Pro Taper Pastrana FMX Bend Contour Fat Bars (121mm tall) Pro Taper Oversize Bar Mounts Pro Circuit T4 Silencer R&D Accelerator Pump With Adjustable Leak Jet STR Anodized Orange Fuel Adjustment Screw Acerbis Rally II Handguards Acerbis/Pro Taper Handguard Mounts DID 520 Gold Chain (120 Links) Maxxis Maxcross IT tires (80/100-21 & 120/90-19), only 5 rides on both tires, lots of tread left Excel Takasago Black Rims Factory EXC Battery Tray (and associated parts) 7 Series Battery Pro Moto Billet Kick Stand Still have some of the factory parts also... Factory Seat Extra Set Of Factory Wheels Some extra plastics Factory Rear Spring Other Misc. Things That Will Be Included I have been riding for 24 years and this is by far the best and my favorite bike i have ever owned! These pics were taken Sunday, this is exactly as the bike is currently...

08-20-2009, 02:23 AM	#12 (permalink)
blackrunner91 Registered User Join Date: Aug 2003 Location: Atlanta, GA or Florence, AL Posts: 238	Sweet bike. Pm sent. __________________ '91 4Runner 22RE 4x4 project rock crawler...on hold '93 4Runner daily driver...1uz Lexus v8 swap. Next up, D44 swap

08-22-2009, 12:55 PM	#13 (permalink)
blackrunner91 Registered User Join Date: Aug 2003 Location: Atlanta, GA or Florence, AL Posts: 238	ttt, make offers. __________________ '91 4Runner 22RE 4x4 project rock crawler...on hold '93 4Runner daily driver...1uz Lexus v8 swap. Next up, D44 swap

08-23-2009, 07:46 PM	#14 (permalink)
blackrunner91 Registered User Join Date: Aug 2003 Location: Atlanta, GA or Florence, AL Posts: 238	back to the top. __________________ '91 4Runner 22RE 4x4 project rock crawler...on hold '93 4Runner daily driver...1uz Lexus v8 swap. Next up, D44 swap

08-27-2009, 05:54 AM	#15 (permalink)
blackrunner91 Registered User Join Date: Aug 2003 Location: Atlanta, GA or Florence, AL Posts: 238	someone make me an offer __________________ '91 4Runner 22RE 4x4 project rock crawler...on hold '93 4Runner daily driver...1uz Lexus v8 swap. Next up, D44 swap

08-28-2009, 01:18 PM	#16 (permalink)
soldiersnake Registered User Join Date: Jul 2009 Posts: 20	my quad and 2k cash when i get back in October.

08-28-2009, 09:21 PM	#17 (permalink)
blackrunner91 Registered User Join Date: Aug 2003 Location: Atlanta, GA or Florence, AL Posts: 238	We'll see if i've still got it when you get back. There are a few things in the works as we speak. __________________ '91 4Runner 22RE 4x4 project rock crawler...on hold '93 4Runner daily driver...1uz Lexus v8 swap. Next up, D44 swap

08-29-2009, 08:36 AM	#21 (permalink)
RMA Contributing Member Join Date: Dec 2008 Location: San Jose ,Ca Posts: 1,132	THanks , sounds like the same thing im using . Good luck on the sale .. __________________ '89 2wd X-tracab,W55,22re,My DD '94 SR5 4Runner 4x4,A340H, 3VZE,Alpine deck,Wifes DD '88 SR5 4runner ,A341E,1UZ-FE,kenwoodVZ907, XRC8, Homemade Roof rack.33x10.50,15 KM2 1" home made body lift, BJ spacers ,CB, rear disc brakes ,lockright rear.sky ebrake,truetrac front. My swap thread http://www.yotatech.com/f161/1uz-fe-...0-3vze-185324/

08-28-2009, 09:31 PM	#18 (permalink)
soldiersnake Registered User Join Date: Jul 2009 Posts: 20	Ok Louis, fair enough, its very nice BTW, the more i look at it the more I like it GL with sale!

08-28-2009, 10:00 PM	#19 (permalink)
RMA Contributing Member Join Date: Dec 2008 Location: San Jose ,Ca Posts: 1,132	Very Nice man.. Im just finishing up a swap of my own and love the new power . Hey just curious about your transfer case, are you using a hydraulic case , if so how are you controlling it .. using the 6 relays .. __________________ '89 2wd X-tracab,W55,22re,My DD '94 SR5 4Runner 4x4,A340H, 3VZE,Alpine deck,Wifes DD '88 SR5 4runner ,A341E,1UZ-FE,kenwoodVZ907, XRC8, Homemade Roof rack.33x10.50,15 KM2 1" home made body lift, BJ spacers ,CB, rear disc brakes ,lockright rear.sky ebrake,truetrac front. My swap thread http://www.yotatech.com/f161/1uz-fe-...0-3vze-185324/

08-29-2009, 03:53 AM	#20 (permalink)
blackrunner91 Registered User Join Date: Aug 2003 Location: Atlanta, GA or Florence, AL Posts: 238	No, I'm using the case from my 91 that has the manual style shifter. It has an adapter that you can unbolt from the trans after removing the case. I am using that adapter and case with the Lexus A341E. __________________ '91 4Runner 22RE 4x4 project rock crawler...on hold '93 4Runner daily driver...1uz Lexus v8 swap. Next up, D44 swap

08-31-2009, 10:53 AM	#22 (permalink)
blackrunner91 Registered User Join Date: Aug 2003 Location: Atlanta, GA or Florence, AL Posts: 238	To the top __________________ '91 4Runner 22RE 4x4 project rock crawler...on hold '93 4Runner daily driver...1uz Lexus v8 swap. Next up, D44 swap

08-31-2009, 03:46 PM	#24 (permalink)
xcmountain80 Registered User Join Date: Jul 2004 Location: Jupiter, FL Posts: 1,879	Man this is a nice rig as I've seen it run in person, and ohhh does it sound good. A

08-31-2009, 05:18 PM	#25 (permalink)
blackrunner91 Registered User Join Date: Aug 2003 Location: Atlanta, GA or Florence, AL Posts: 238	Thanks man. Wish I could get a video on here somehow. I think everyone would like the sound.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search