Sick deals at pro-tools
#1
Registered User
Thread Starter
Join Date: Jul 2009
Location: Eastern NC
Posts: 832
Likes: 0
Received 0 Likes
on
0 Posts
Sick deals at pro-tools
Got an emai this week from pro-tools offering an email promotion until June 30. Said if you purchased a HMP200 threw email that they would give you two free dies. I did not believe it so I called. Sure enough they said that two dies of my choice would be free for purchasing the HMP200.
Verticle hydro type benders are what I had pretty much settled on, either buying or building. They dont take up as much floor space in a small garage, dont need to be bolted down, can be stashed about anywhere. Great for someone like me that is not going to be using it all the time. But even with building one the cost of the dies were going to put the purchase sometime in the future.
With the thought of getting two free dies, I could not pass it up.
Yestarday I ordered up the HMP200, a 1.75" 6" CLR, and a 1.5" 5"CLR.
If your in the market, give them a call maybe they will hook you up.
Later
Verticle hydro type benders are what I had pretty much settled on, either buying or building. They dont take up as much floor space in a small garage, dont need to be bolted down, can be stashed about anywhere. Great for someone like me that is not going to be using it all the time. But even with building one the cost of the dies were going to put the purchase sometime in the future.
With the thought of getting two free dies, I could not pass it up.
Yestarday I ordered up the HMP200, a 1.75" 6" CLR, and a 1.5" 5"CLR.
If your in the market, give them a call maybe they will hook you up.
Later
Last edited by TinMan; 05-28-2010 at 06:04 PM.
#2
Registered User
Thread Starter
Join Date: Jul 2009
Location: Eastern NC
Posts: 832
Likes: 0
Received 0 Likes
on
0 Posts
The HMP came in today. I have to say I am very impressed with the quality, and can not wait to get some tube to bend.
Pro-tools will give you the plans for this bender for free. I had planned on building one, after seeing the pro-tools HMP200, I know there is now way I could have built one to match the quality of theirs.
Shipping was fast. I have been on the phone with a guy named Dean quite a bit, and he has been great to deal with.
Anyway here are a few pics
Hope to scroung up something to bend soon.
Later
Pro-tools will give you the plans for this bender for free. I had planned on building one, after seeing the pro-tools HMP200, I know there is now way I could have built one to match the quality of theirs.
Shipping was fast. I have been on the phone with a guy named Dean quite a bit, and he has been great to deal with.
Anyway here are a few pics
Hope to scroung up something to bend soon.
Later
Thread
Thread Starter
Forum
Replies
Last Post
primordialbeast117
86-95 Trucks & 4Runners
11
12-19-2015 12:23 PM