Armorology - Page 3

spindleshanks · 01-08-2006, 02:01 AM

Armorology was recommended to me by the folks at CoTTORA. Said he'll do sliders for $150 a side, installed. I like the work he's done. I just have to get to Colorado Springs is all. Time to visit some friends in So. Col.!

Flygtenstein · 01-24-2006, 09:11 PM

I really liked the work on Ric's front. I did not take a close look at the rear.

What is shop rate there? Do they just flat rate everything?

Looks like good product for sure.

Ric · 01-24-2006, 09:32 PM

Flygtenstein,
im not real sure on the shop rate, i do remember talking to Jed about, and thinking it was very low for a "shop rate" but he did say it will be going up, didnt say when.
he pretty much does have a so called flat rate per item, i know that im very happy with both bumpers, ive seen others, and yes there is some very good quality products out there, but with his quality work and great customer service, i wont go anywhere else.

FilthyRich · 02-02-2006, 03:26 PM

can I get some pics of the front bumper brackets and any other non-visible angles

Ric · 02-02-2006, 06:33 PM

FilthyRich,
when it warms up ill get all the pics ya want, just let me know what angles ya want.

garrett1478 · 03-05-2006, 11:37 PM

ric,

i really like the prerunner type tubes on the front, but it really looks like the outer ones partially block the headlights... when you first got this bumper, did you notice any difference in the light output patterns?

heres a pic that really makes me wonder...

Ric · 03-06-2006, 06:17 AM

garrett1478,
very very little, not even close enough to worry about. if had it to do over agan, i would do it just the same. The approach angle is crazy, i love the look, Ive winch a few people, the bumper has NOT move at all, it rocks, lol so no i wouldnt change anything, the stinger doesnt effect the lights.

Darrin530 · 10-16-2007, 01:47 PM

how much are the bumpers they built you? I would have to have them shipped but I have family in salt lake they could possible do it. do you have the specs on the rear bumper?

Kno3del · 11-07-2007, 11:45 AM

i would like to know the price too. if you can, pm me what it was

**rocket** · 11-18-2007, 10:44 PM

You can get a quote directly from Armorology by calling (719) 632-8125
For custom built bumpers, they require your vehicle to be in their shop...they do not build and ship.

01-08-2006, 02:01 AM	#51 (permalink)
spindleshanks Registered User Join Date: Nov 2005 Location: Loveland, CO Posts: 621	Armorology was recommended to me by the folks at CoTTORA. Said he'll do sliders for $150 a side, installed. I like the work he's done. I just have to get to Colorado Springs is all. Time to visit some friends in So. Col.! __________________ '03 beauty of a white Tacoma, check it out: http://www.yotatech.com/f83/spindles.../#post50606613 "The fingers you have used to dial this number are too fat. For information on how you can obtain your own personal dialing wand, please mash your palm against the keypad now."

01-24-2006, 09:11 PM	#52 (permalink)
Flygtenstein Registered User Join Date: Sep 2002 Location: Fort Collins, CO Posts: 4,257	I really liked the work on Ric's front. I did not take a close look at the rear. What is shop rate there? Do they just flat rate everything? Looks like good product for sure. __________________ Ease on down the road.

11-18-2007, 10:44 PM	#60 (permalink)
rocket Super Moderator Staff Join Date: Apr 2005 Location: Colorado Posts: 4,333	You can get a quote directly from Armorology by calling (719) 632-8125 For custom built bumpers, they require your vehicle to be in their shop...they do not build and ship. __________________ under construction: '96-'02 gone: '92

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Another armorology bumper, this time on a Tacoma!	spindleshanks	The Fab Shop	17	06-11-2006 06:31 AM

01-24-2006, 09:32 PM	#53 (permalink)
Ric Banned - User requested Join Date: Feb 2003 Location: earth Posts: 4,526	Flygtenstein, im not real sure on the shop rate, i do remember talking to Jed about, and thinking it was very low for a "shop rate" but he did say it will be going up, didnt say when. he pretty much does have a so called flat rate per item, i know that im very happy with both bumpers, ive seen others, and yes there is some very good quality products out there, but with his quality work and great customer service, i wont go anywhere else.

02-02-2006, 06:33 PM	#55 (permalink)
Ric Banned - User requested Join Date: Feb 2003 Location: earth Posts: 4,526	FilthyRich, when it warms up ill get all the pics ya want, just let me know what angles ya want.

03-05-2006, 11:37 PM	#56 (permalink)
garrett1478 Banned Join Date: Jan 2005 Posts: 2	ric, i really like the prerunner type tubes on the front, but it really looks like the outer ones partially block the headlights... when you first got this bumper, did you notice any difference in the light output patterns? heres a pic that really makes me wonder...

03-06-2006, 06:17 AM	#57 (permalink)
Ric Banned - User requested Join Date: Feb 2003 Location: earth Posts: 4,526	garrett1478, very very little, not even close enough to worry about. if had it to do over agan, i would do it just the same. The approach angle is crazy, i love the look, Ive winch a few people, the bumper has NOT move at all, it rocks, lol so no i wouldnt change anything, the stinger doesnt effect the lights.

10-16-2007, 01:47 PM	#58 (permalink)
Darrin530 Registered User Join Date: Oct 2006 Location: chico Posts: 5	how much are the bumpers they built you? I would have to have them shipped but I have family in salt lake they could possible do it. do you have the specs on the rear bumper?

11-07-2007, 11:45 AM	#59 (permalink)
Kno3del Registered User Join Date: Sep 2007 Location: sequim, WA Posts: 29	i would like to know the price too. if you can, pm me what it was