SE4RJ 05 Picture Thread

[turboale]

You figure it out brett? Chris jumped in there after he stopped going and the smoke just hadn't cleared yet. That does look like its about to get ugly though

This ad is not displayed to registered members. Register your free account today and become a member on Yotatech!

[dragr1]

Originally Posted by turboale

You figure it out brett?

Chris jumped in there after he stopped going and the smoke just hadn't cleared yet. That does look like its about to get ugly though

No not yet, I'm trying the sony websites now.

Edit: I have downloaded and installed every update for my camera and software from Sony. Nothing works-no combination of installing, uninstalling software and usb drivers works. I can download from the video card but when trying to download from the tape it doesn't work-it never reckognizes the camcorder. Upon trying to install software, I get an error message that says my software from Sony (disc that came with the camera and worked fine with ME and Windows 2000 and says will work with XP)(I have XP on this new computer) has not passed Windows Logo Testing to verify its compatability with Windows XP. It goes on to say that windows strongly recommends stopping the install b/c it may cause the computer to not function right either now or at a later date. Ideas?


AAAARRRGGGHHHHH

[ravencr]

Brett, I have the same problem with mine. I can only upload from the tape to my memory card, and then to my computer. It really sucks. I have the same exact problem, but if you figure it out, please let me know, because all my videos end of up being only 1:30 max, because I have such a small memory card.

Chris

[dragr1]

Originally Posted by ravencr

Brett, I have the same problem with mine. I can only upload from the tape to my memory card, and then to my computer. It really sucks. I have the same exact problem, but if you figure it out, please let me know, because all my videos end of up being only 1:30 max, because I have such a small memory card.

Chris

How do you do that? I didn't know you could upload from the tape to the card?
Are you using XP?
Has yours always been like that or did you just switch to XP?




I have a 64 mb card now, maybe I'll just get a 1g card and say screw the tape. Wonder how much video will go on a 1g card?

[ravencr]

Originally Posted by dragr1

How do you do that? I didn't know you could upload from the tape to the card?
Are you using XP?
Has yours always been like that or did you just switch to XP?




I have a 64 mb card now, maybe I'll just get a 1g card and say screw the tape. Wonder how much video will go on a 1g card?

I've got the normal card that comes with it, which isn't much. You basically, it's in the directions on how to do it, and I don't have my camera to see how to do it for sure. If you had a large enough memory card, it would be fine to do it that way.

Chris

[yotaman]

Originally Posted by dragr1

No not yet, I'm trying the sony websites now.

Edit: I have downloaded and installed every update for my camera and software from Sony. Nothing works-no combination of installing, uninstalling software and usb drivers works. I can download from the video card but when trying to download from the tape it doesn't work-it never reckognizes the camcorder. Upon trying to install software, I get an error message that says my software from Sony (disc that came with the camera and worked fine with ME and Windows 2000 and says will work with XP)(I have XP on this new computer) has not passed Windows Logo Testing to verify its compatability with Windows XP. It goes on to say that windows strongly recommends stopping the install b/c it may cause the computer to not function right either now or at a later date. Ideas?


AAAARRRGGGHHHHH

Uninstall everything pertaining to the camera (all software), restart your computer, now plug the camera up and then turn it on. Windows XP should recognize the connection and give you a choice as to what you want to do. You should get a prompt and one of the choices should be “Microsoft Scanner and Camera Wizard”, Double left click on that and just follow the steps.

Let me know if It works or doesn’t.

EDIT: Chris give it a try too.

[Sherpa]

Originally Posted by zman2day

Hmm...next time I'll have to take you on...I've got my own mix of SC mods....plus the 9.5psi pully

Anytime, anywhere!

-Sherpa

[Sherpa]

Originally Posted by turboale

haha, you guys are funny... Chris, Don't forget the URD kit... thats a big difference. And, my shifts are now quicker too... Also, don't plan on gett'n 35s unless all you want to smell is my dual exhaust!

Well, it was closer than I was expecting... I'd like to see what happens from a stop. I can't wait til next time also! By that time I should have a chip and exhaust ( Just got the cold air intake and short shifter in) They say 10-12hp each... and that the US version of the R actually is 250hp not 240. So that puts me at about 280 all motor and 60lbs less. Should be a good time I also just had my 20k service (which includes a tune up) and damn... it made such a difference! I couldn't believe it. Anyway, can't wait for the rematch sherp! It should be a good race!

PS, andy... got a couple for you to choose from. Either of these work?

I agree! It will be a good race! I know I'll have to get the smaller pulley and do a little more tuning. I'm looking forward to it!

I too wonder what would have happend if we had gone from a dead stop. I haven't tuned 1st or 2nd for wide open throttle. I'll have to get this all taken care of so we can have that rematch!

-Sherpa

[Sherpa]

Originally Posted by turboale

Awesome, this car should be about the same. A guy with nothing but a cone filter (usually takes power) and the exhaust flap mod got a 13.91 @ 99.7mph, 1.97 60ft

Hey! That's good news for my 4Runner! I also needed to remember to remove the deck plate from my airbox! Come to think of it, I might have to get some additional stickers for the added HP they give!

-S

[Sherpa]

Originally Posted by Hyperlite

Chris uh I hope you don't like your head cause It looks like the begining shot to the movie Faces of Death.

Taco --><-- Chris

I've never seen FoD. Is there really a video of someone getting run over like that?

[dragr1]

Originally Posted by yotaman

Uninstall everything pertaining to the camera (all software), restart your computer, now plug the camera up and then turn it on. Windows XP should recognize the connection and give you a choice as to what you want to do. You should get a prompt and one of the choices should be “Microsoft Scanner and Camera Wizard”, Double left click on that and just follow the steps.

Let me know if It works or doesn’t.

EDIT: Chris give it a try too.

Tried it and it got an installation wizard, but for some reason now it can't find the software-I have the cd in the drive. WTF? This is really pissing me off.






Edit: I give up, I'm just gonna smash the camera and the computer!







I'll keep the vid tape though.

[mysticpur]

No problems on mine Brett. I loaded XP a few weeks ago, loaded the camcorder softwear the next night. No problems here. You can always bring it with you to my house and pull the vids off the tape, or get me the tapes and I can do it.

NOTE: The pixela instructions note that XP users must be logged in as an administrator to load the softwear, but I didn't!

SIDENOTE: You are clicking the movie/tape button on the left side of the screen and not the memory stick button...right?

[dragr1]

Originally Posted by mysticpur

No problems on mine Brett. I loaded XP a few weeks ago, loaded the camcorder softwear the next night. No problems here. You can always bring it with you to my house and pull the vids off the tape, or get me the tapes and I can do it.

NOTE: The pixela instructions note that XP users must be logged in as an administrator to load the softwear, but I didn't!

SIDENOTE: You are clicking the movie/tape button on the left side of the screen and not the memory stick button...right?

Whoa, wasn't expecting to see you on here-it's been a while! Yeah, I'm clicking the right button. I'm not logged on as an administrator though-I'll have to try that.

[synovus]

Originally Posted by dragr1

Alright computer guru's I need your help...

Reason number 234098094 to own a Mac.

[Hyperlite]

Originally Posted by Sherpa

I've never seen FoD. Is there really a video of someone getting run over like that?

not exactly like that, but it is a series of real home video of people killed all sorts of ways. Like getting hit by trains, eaten by bears, girls getting chopped in half by boats, tons of suicides and people getting mowed down by all sorts of heavy machinery. You know just some wholesome family fun. 0

[waskillywabbit]

Look here:

http://www.yotatech.com/showthread.php?t=59503

[yotaman]

Originally Posted by dragr1

Whoa, wasn't expecting to see you on here-it's been a while! Yeah, I'm clicking the right button. I'm not logged on as an administrator though-I'll have to try that.

Brett,

Do you have any spare 3rds with elockers or know where I can get one for a reasonable price?

EDIT: I'm going to post a wanted ad in the classified section but if anyone knows where I can get a 3rd with an elocker I'm looking to buy one, soon.

[dragr1]

Originally Posted by yotaman

Brett,

Do you have any spare 3rds with elockers or know where I can get one for a reasonable price?

EDIT: I'm going to post a wanted ad in the classified section but if anyone knows where I can get a 3rd with an elocker I'm looking to buy one, soon.

I have a 3rd, but no-elocker third. The third I have has 3.90 gears and no locker.

[yotaman]

Originally Posted by dragr1

I have a 3rd, but no-elocker third. The third I have has 3.90 gears and no locker.

OK Thanks.

I’ve decided to mod my rear axle and install an e-locker instead of an EZ Locker so I need a 3rd with the e-locker. If you come across one let me know.

I’m looking to spend around $275-$375 on one (3rd with e-locker) sense I'll have to re-gear it. I have 4.88’s now.

EDIT: What locker are you running in the rear?
EDIT, EDIT: Never mind I read your sign. :pat:

[dragr1]

Originally Posted by yotaman

OK Thanks.

I’ve decided to mod my rear axle and install an e-locker instead of an EZ Locker so I need a 3rd with the e-locker. If you come across one let me know.

I’m looking to spend around $275-$375 on one (3rd with e-locker) sense I'll have to re-gear it. I have 4.88’s now.

EDIT: What locker are you running in the rear?
EDIT, EDIT: Never mind I read your sign. :pat:

Hehe, yeah I love the e-locker. Look for jonathan, he just bought an e-locker at a good price-he may know where there is another one.

[yotaman]

Originally Posted by dragr1

Hehe, yeah I love the e-locker. Look for jonathan, he just bought an e-locker at a good price-he may know where there is another one.

Yeah there are a lot of advantages to having the e-locker instead of a lunchbox locker or even an ARB. I just wise I could put an e-locker in the front of my rig.

[dragr1]

Originally Posted by yotaman

Yeah there are a lot of advantages to having the e-locker instead of a lunchbox locker or even an ARB. I just wise I could put an e-locker in the front my rig.

Well, you could if you did a SAS.

Dang it's late what the_______ I'm I doing up?

[yotaman]

Originally Posted by dragr1

Well, you could if you did a SAS.

Dang it's late what the_______ I'm I doing up?

I plain to push my IFS to it's limits and beyond. I'm going to spend the $3000+ SAS money on a bad a$$ 3.4 Supercharged monster.

EDIT: and maybe a marlin crawler!!!

[Hyperlite]

I have an extra E-locker in the storage shed. It has 4.30 gears with the harness and switch.

[Stump1883]

Greg it looks like you just hit jackpot right there.