Heater Issues solved.
Posted 10-29-2009 at 12:37 AM by srozell
Today I picked up the new switch, and attempted to install it. It seems I broke off more than one of the tabs that are required to hold it in place, so it wouldn't stay in place.
I used a zap-strap and managed to secure it in a manner that seems to work.
The dash is re-assembled and everything works fine.
I finished the job with a spray and wipe down of the dash and console and it feels like a new truck again.
After hauling a heavy trailer the rear bumper made by trail-master is sagging really bad. I ordered a couple of brackets that should solve that problem for about $100.00. Hopefully I can get them installed before I need to haul a trailer again.
I used a zap-strap and managed to secure it in a manner that seems to work.
The dash is re-assembled and everything works fine.
I finished the job with a spray and wipe down of the dash and console and it feels like a new truck again.
After hauling a heavy trailer the rear bumper made by trail-master is sagging really bad. I ordered a couple of brackets that should solve that problem for about $100.00. Hopefully I can get them installed before I need to haul a trailer again.
Total Comments 0
