YotaTech Forums - View Single Post

^VooDoo^ · 08-05-2006, 07:56 PM

This is what your ADD vacuum controller looks like, Its on the passenger side fender.
The top hoses goe to a little tank under the passenger fender as a resurve,
the bottom hoses got to the diff.
Check all the hoses are connected right and have no cracks.
The little blue thing in the picture is a oneway valve, Make sure its working properly by blowing through it both ways and that it is connected right, This valve keeps the vacuum in the cannister while the engine is throttled.

08-05-2006, 07:56 PM	#3 (permalink)
^VooDoo^ Contributing Member Join Date: Mar 2006 Location: Alhambra CA. Posts: 395	CHeck this out... This is what your ADD vacuum controller looks like, Its on the passenger side fender. The top hoses goe to a little tank under the passenger fender as a resurve, the bottom hoses got to the diff. Check all the hoses are connected right and have no cracks. The little blue thing in the picture is a oneway valve, Make sure its working properly by blowing through it both ways and that it is connected right, This valve keeps the vacuum in the cannister while the engine is throttled. Attached Thumbnails