Quote:
|
Originally Posted by ovrrdrive
To the OP:
Sounds like a really strange problem... Did you do a compression check?
Good plugs? Wires? All the basics covered?
You say it has no power, when it falls flat on its face does it do it smoothly or with a rough stutter?
Just trying to brainstorm a little...
|
Compression check is scheduled for tommorrow
It idels well, and stays smooth as I accellerate SLLLOOOOWWWLLLYYY. But if I hit the gas hard there is ALOT of valve chatter. I thought I might be bad gas since it has been sitting for a while but after fill up it's still having problems. It is also running hotter then usual. When coming to a stop it will bog down due to hitting the brakes (booster vacume pull).
I think I might inspect all of my vacume lines just to make sure I installed the rats nest properly
I had the valve seats redone and the intake/exhaust ported while I had the head off. I'm going to be pissed if the up the valve seats
Thanks for the help guys, we'll get this thing figured out.
__________________
My Projects
An unhealthy 7MGTE and 22RE obbsession
Projects:
1988 Supra NA->Turbo
1989 4runner 22re 8" Suspension IFS 22RE
1989 RX-7 getting a LS1 T56 swap =)
1989 17' Rinker bowrider Inboard mercruiser