YotaTech Forums - View Single Post

getitdone · 05-29-2006, 09:44 PM

For cutting I used about 10 cut off wheels for my harbor frieght angle grinder. Everything was from plate.

If I had to do it again I would have used square tube for the hanger. Also I would have been more careful as to what kind of metal I was getting out of the scrap bin. See drilling metal for explanation.

05-29-2006, 09:44 PM	#5 (permalink)
getitdone Contributing Member Join Date: Jul 2004 Location: Ft. Collins, Co Posts: 1,006	For cutting I used about 10 cut off wheels for my harbor frieght angle grinder. Everything was from plate. If I had to do it again I would have used square tube for the hanger. Also I would have been more careful as to what kind of metal I was getting out of the scrap bin. See drilling metal for explanation. __________________ Chris Fischer 3D 85 4Runner SR5 \| 33" BFG M/T on flat black rims \| Chevy springs \| Custom Grab cage with overhead cb mount \| Custom fabbed center console \| Freshly rebuilt axle with IFS hub/caliper swap \| Rock Sliders \| Lots more... In Colorado, Dig. Last edited by getitdone; 06-18-2006 at 06:05 PM.