Any comments how you 'optimized' your own alarm install??
eg Hood Pin switch location on a 4runner etc.
eg Siren location on a 4runner etc.
eg Antenna placement
eg shock sensor placement
Hood pin usually works out good up @ the fire wall, just mount and tweak until you get the proper fit.
Siren someplace someone cant get to it easily and disable, try to hide it while still protecting it from elemenat, engine ,ect
Antenna route it up the pillar and tuck it under the head liner and place it behind the rear view mirror right below the top of the glass
I have always put my shock sensor on the steering column. zip tie it down good and set the sensativity so if a solid thump on any window sets the alarm to warning ,should be a double chirp.
The remote start is not to bad my brother is the one who helps me out with my alarms (15yrs exp) if anyone nees i can possible get the wire specs from the book we have, or get them faxed from our DEI supplier.
