|
DEI Alarm Installed Okay
I installed the DEI Viper 791xv alarm. So far so good.
I initially got some good comments off this forum, so thought I'd post.
Car security usually has 3 parts: Remote Start, Alarm Security, and Keyless Entry.
Remote Start: as a DIY install I avoided this for now.
Alarm: I did not 'hide' any wires yet with masking tape and I initially left it all a little exposed until the alarm all checks out okay. i'll tape and hide later.
Keyless Entry: I left the factory keyless entry door lock system. I prefer 2 different remotes for added layer of security, 1. factory doorlock 2. dei security.
Any comments how you 'optimized' your own alarm install??
eg Hood Pin switch location on a 4runner etc.
eg Siren location on a 4runner etc.
eg Antenna placement
eg shock sensor placement
- 4runner 2000
|