YotaTech Forums - View Single Post

bigacuralvr · 05-01-2006, 10:49 PM

Ok, I take it this is a Viper/Clifford/DEI alarm. Here is the thing, the green and black wires go on either side of the starter wire. You have to cut the starter wire in half, the green goes to key side, and the black to starter side. The yellow then gets attached to the IGN (+) wire. Then, your starter disable will work. If you just splice into the starter wire, there is nothing to go into and out of the relay. If this makes sense....awesome!! If not, just PM me, and I'll explain more.
Brett

05-01-2006, 10:49 PM	#2 (permalink)
bigacuralvr Registered User Join Date: Dec 2005 Location: Evans/Greeley, CO Posts: 293	Ok, I take it this is a Viper/Clifford/DEI alarm. Here is the thing, the green and black wires go on either side of the starter wire. You have to cut the starter wire in half, the green goes to key side, and the black to starter side. The yellow then gets attached to the IGN (+) wire. Then, your starter disable will work. If you just splice into the starter wire, there is nothing to go into and out of the relay. If this makes sense....awesome!! If not, just PM me, and I'll explain more. Brett __________________ Current: 94 4Runner SR5 3.Slow...for now. SOLD. :( 99 4Runner Limited SuperCharged, Hood Scoop, Westin Bull Bar, PIAA 510's, PIAA GTX Heads and Fogs, ProComp 1069's, True Flow Intake, Jardine Exhaust, Red Interior Lights, Other Little Stuff...