YotaTech Forums - View Single Post - changed plugs and wires now wont stay running
Thread: changed plugs and wires now wont stay running
View Single Post
Old 04-19-2006, 04:58 AM   #15 (permalink)
MTL_4runner
Contributing Member
 
MTL_4runner's Avatar
 
Join Date: Jul 2003
Location: Montreal, QC Canada
Posts: 8,807
Send a message via AIM to MTL_4runner
Quote:
Originally Posted by Onimacus
Sorry about not specifying the car... its a 1997 Tacoma 3.4L v6.

The car ran fine before I changed the plugs and wires, it was giving me a p0133 code (Cyl 2 misfire)

I wonder what I could have broke while just doing the plugs and wires =(

...Now when i try to start it... it clicks once and then with the clutch down and the key turned trying to start it... the lights go out and the clicking stops.

If i hold the key trying to start it after awhile, it starts to click faster. If i just leave the key in the ON position all the display lights turn on.

=( I've never messed up on spark plugs before I am afraid to tell my friend I broke her truck.
Sounds like the truck has a bad battery (or perhaps alternator which caused the battery to slowly die).
Charge the battery again and bring it to a store to be load tested.
__________________
- Jamie

1996 4Runner SR5 4X4 Auto

Deckplate Mod, Hayden Tranny Cooler, Amsoil Air Filter, OME 881/906 N86C/N91SC Lift

Best OBD II scan tool I have used!.

.....and I am AMERICAN!
MTL_4runner is offline   Reply With Quote