YotaTech Forums - View Single Post

mt_goat · 04-12-2006, 12:19 PM

Ok, I have driven about 8 years now without a rear ABS sensor and ABS computer and now I'd like to get rid of this ABS actuator:

so I can use that space for something much more fun (aquamist pump). Mike @ ORS will make me a by-pass for the PS highpressure line, but what has to be done to by-pass the brake lines that go in and out of this thing?

One line runs to the brake fluid reservoir and the other goes to the rear LSPV.

Anyone done this or know how to do it?

04-12-2006, 12:19 PM	#34 (permalink)
mt_goat Contributing Member Join Date: Nov 2002 Location: Oklahoma State Posts: 8,916	Ok, I have driven about 8 years now without a rear ABS sensor and ABS computer and now I'd like to get rid of this ABS actuator: so I can use that space for something much more fun (aquamist pump). Mike @ ORS will make me a by-pass for the PS highpressure line, but what has to be done to by-pass the brake lines that go in and out of this thing? One line runs to the brake fluid reservoir and the other goes to the rear LSPV. Anyone done this or know how to do it? __________________ ~Dale~ 93 4X4 ext-cab, auto, SR5, 3.4 V6, supercharged, 2.1" pulley, URD fuel mods, Aquamist WI, IPT valve body mod, dual cases, 4" superlift front, Alcan springs rear, 33 BFG MT, ARB locked front & rear, 5.29 US Gears, RB 1" Body Lift, 1.5" ball joint spacers, manual hubs, TJM T-17, Warn m8000. Last edited by mt_goat; 02-02-2008 at 09:33 AM.