YotaTech Forums - View Single Post

mt_goat · 03-30-2006, 05:34 AM

This was a very satisfying day, got the engine bay all washed out,

It had never been washed out in the 13 years I owned it so I couldn't wait to get it clean (I was possessed like Monica). I started with engine degreaser but that only helped with the grease and oil spots, for the rest of the dirt I used a scrub brush and a toilet brush and a bucket of soapy hot water. It would have been nice to have a power washer, but I don't.

In the process I discovered a blown bushing on my torsion bar rocker arm (Superlift part), so I had to tear the whole front end apart too. The good news is with the engine bay empty getting those bushings out is much easier.

03-30-2006, 05:34 AM	#8 (permalink)
mt_goat Contributing Member Join Date: Nov 2002 Location: Oklahoma State Posts: 8,863	This was a very satisfying day, got the engine bay all washed out, It had never been washed out in the 13 years I owned it so I couldn't wait to get it clean (I was possessed like Monica). I started with engine degreaser but that only helped with the grease and oil spots, for the rest of the dirt I used a scrub brush and a toilet brush and a bucket of soapy hot water. It would have been nice to have a power washer, but I don't. In the process I discovered a blown bushing on my torsion bar rocker arm (Superlift part), so I had to tear the whole front end apart too. The good news is with the engine bay empty getting those bushings out is much easier. __________________ ~Dale~ 93 4X4 ext-cab, auto, SR5, 3.4 V6, supercharged, 2.1" pulley, URD fuel mods, Aquamist WI, IPT valve body mod, dual cases, 4" superlift front, Alcan springs rear, 33 BFG MT, ARB locked front & rear, 5.29 US Gears, RB 1" Body Lift, 1.5" ball joint spacers, manual hubs, TJM T-17, Warn m8000. Last edited by mt_goat; 02-02-2008 at 09:16 AM.