YotaTech Forums - View Single Post

alanbobalan · 02-26-2006, 11:23 PM

has anyone done this before? any thoughts? if anyone has some pics, that would be super rad!

i plan on running tundra coils up front with either OME or TRD shocks which should yield me about 2.25" of lift

and then the chevy springs in the rear with bilstein shocks. i'm hoping to keep the rear level with the front, but i hear this setup gives about 2 - 3 inches of total lift.

from what i've heard, the ride quality of this front and rear setup is supposed to be outstanding. the flex should be pretty sweet too!

if anyone has pics, please post! thanks

-alan

02-26-2006, 11:23 PM	#1 (permalink)
alanbobalan Registered User Join Date: Oct 2004 Location: chino hills, ca Posts: 330	63" chevy rear springs on 98 taco? has anyone done this before? any thoughts? if anyone has some pics, that would be super rad! i plan on running tundra coils up front with either OME or TRD shocks which should yield me about 2.25" of lift and then the chevy springs in the rear with bilstein shocks. i'm hoping to keep the rear level with the front, but i hear this setup gives about 2 - 3 inches of total lift. from what i've heard, the ride quality of this front and rear setup is supposed to be outstanding. the flex should be pretty sweet too! if anyone has pics, please post! thanks -alan __________________ EL TRUCKO THE X-WING FIGHTER 94 2wd pickup 22-re 5 spd 28 mpg el trucko kills tie fighters and soccer moms. MR TACO 98 tacoma 4x4 sr5 3.4 v6 5 spd stock with 31s mr taco, you were a great pal. may you live long and prosper. THE MILLENIUM FALCON (R.I.P.) 87 4runner efi sr5 ummm rolled over with lots of junk that i wasted my money on.