the front spring hanger i built myself.
the shackle tubes that go through the frame, i sourced my own tubing. got a foot of it for $9 and that was more than enough for both tubes.
the frame jigs i borrowed.
shackles i made myself.
the front springs are the stock rear springs with the bottom leaf from the stock springs that came with the axle.
front driveshaft:
i clearanced the stock IFS front CV:
http://www.4x4wire.com/toyota/tech/cvmod/
and then built a square driveshaft. it works, and it was cheap and i can go 40 miles per hour or so before it really starts vibrating.
.JPG)