YotaTech Forums - View Single Post

93ToyKid · 12-08-2005, 03:05 PM

Thanks for the heads up RobG. I need to check that. Well...half the IFS is off. What a pain in the a$$. Now its back out to do the rest of it. Once we determine where the tranny cooler is going to go, I'll let you guys know. BTW...the holes in the frame for the shackle tubes were cut using a $10 hole saw that goes on the end of a drill. It did amazingly well. Drilled all the way through. Now...back to the shop to get the rest of this crap off....pics tonight!

12-08-2005, 03:05 PM	#14 (permalink)
93ToyKid Registered User Join Date: Jan 2005 Location: High Point, NC/School at NC State Posts: 387	Thanks for the heads up RobG. I need to check that. Well...half the IFS is off. What a pain in the a$$. Now its back out to do the rest of it. Once we determine where the tranny cooler is going to go, I'll let you guys know. BTW...the holes in the frame for the shackle tubes were cut using a $10 hole saw that goes on the end of a drill. It did amazingly well. Drilled all the way through. Now...back to the shop to get the rest of this crap off....pics tonight!