04-26-2005, 11:43 AM
|
#3 (permalink)
|
|
Sponsoring Member
Join Date: Dec 2002
Location: Seattleish, WA
Posts: 9,078
|
Quote:
|
Originally Posted by dreux13
1) Has anyone found a place/part # for the pipe? I know Dr. Z had a pipe cutom made at an exhaust shop, but is everyone doing that? I'd expect someone found something.
|
You should be able to find something at a Home Depot or Lowes.
The easiest thing to do is to take off the intake in the parking lot and walk in with it for matching. Look in the plumbing section of course, but don't forget to check out electrical conduit as well - Lowes stocks some big stuff that worked out well for Dr. Z's first pass.
My first ISR Mod was using plumbing end caps and the stock pipe. I did a friend's with PVC from Lowes, then I removed my end cap solution and bought an Airaid MIT. (pricey, but slick looking)
__________________
~ Mark
'96 4Runner Limited S/C MI - 370cc injectors, Air! horns, Airaid MIT, ATS A-arms, 285/75/R16 BFG MTs, Bored TB, Brembo slotted, Cobra 75 WXST, Deckplate, Downey headers, Hayden cooler, IPT valve body, Level 10 torque convertor, Meanstreak exhaust, OME/OME rears, On-board PC (XM, Nav, WiFi, etc), Port 'n Polish, Remote Start, SAW fronts, Hilux console, SMT-5, Stubb's sliders, Supra MAF, TJM-17, 2.0" pulley, Viair 450c, Walbro 190, Weasy2k cams
|
|
|