|
Need to lower rear of truck...Leaf removal?
I searched but could not find anything helpful. I bought All Pro's front a-arms and coilovers and rear leafs a while back. The rear leafs are 3" and the fronts are adjustable. My problem is that I have to crank the front coilovers up so high to match the rear that it rides worse than stock. I also have went thru a set of all pro's "high angle" cv boots in just 6 months (and only off-roading a couple times -very lightly). I have been trying to figure out how to drop the back end down so I can take some of the pressure off of the front. I thought about removing a leaf in the pack but have no idea how much that would drop it down or what it ride like. It is my DD and the heaviest load it ever carries is my dirtbike every once and a while. Does anyone have any ideas/experience with this? Thanks for any help!
Joe
__________________
99 Tacoma 3.4L TRD 33x12.50 Pro Comp Mud Terrains, All Pro Coil Overs (Bilstein) UCA's, 3" All Pro Leafs, 5150 shocks
86 Toyota Reg Cab Short Bed, parts of a 22r, 35x12.50 Mud Terrains, Dual cases, 5.29 gears, Rear spool, Front Detroit, All parts for solid axle swap uninstalled. No time, no motor
|