YotaTech Forums - View Single Post - 93 'peekup truck front gear change knowledge needed

tc · 01-05-2009, 07:20 AM

Order a master install kit from Performance Offroad Center or 4WheelParts for the 7.5" Toyota IFS. It will have all the parts you need.

Actually, yes, you can take it apart while you gather parts up. The '93 has a full floating front end, so you can remove the CV's and the entire diff and drive the truck if you like.

It sounds like you may not be all that familiar with Toyota diffs. Check out www.gearinstalls.com for info on them.

Also, here is a link to the Factory Service Manual for your rig:
http://www.personal.utulsa.edu/~nathan-buchanan/93fsm/

01-05-2009, 07:20 AM	#5 (permalink)
tc Contributing Member Join Date: Nov 2005 Location: Longmont, CO Posts: 8,376	Order a master install kit from Performance Offroad Center or 4WheelParts for the 7.5" Toyota IFS. It will have all the parts you need. Actually, yes, you can take it apart while you gather parts up. The '93 has a full floating front end, so you can remove the CV's and the entire diff and drive the truck if you like. It sounds like you may not be all that familiar with Toyota diffs. Check out www.gearinstalls.com for info on them. Also, here is a link to the Factory Service Manual for your rig: http://www.personal.utulsa.edu/~nathan-buchanan/93fsm/ __________________ Check out www.coTTORA.org to hook up with great Toyota 'wheelin' folks! Current - 93 4Runner: 3VZ 33"x10.50" no lift ARB F/R 96 Impala SS: My own personal cop car Previous - 89 2WD Pickup 22R, Fabtech "Ivan Dan" lift, 31x10.50, IASCA World Finals 4th Place Stop with the mods and get on the trail! Pix at www.4wheelingoh.shutterfly.com/action Last edited by tc; 01-05-2009 at 07:24 AM.