YotaTech Forums - View Single Post

iamsuperbleeder · 12-20-2008, 11:34 AM

that's the step-by-step is the one I went by, and it's a good one!

once you do one side, you can do the other without even reffering to the write up; they're that easy to do!

here's my little exprience (I did a little more than just the hubs, but you get the idea)

http://www.yotatech.com/f116/find-li...ry-day-156896/

good luck!

12-20-2008, 11:34 AM	#3 (permalink)
iamsuperbleeder Contributing Member Join Date: Feb 2008 Location: Casselberry, Fl Posts: 5,236	that's the step-by-step is the one I went by, and it's a good one! once you do one side, you can do the other without even reffering to the write up; they're that easy to do! here's my little exprience (I did a little more than just the hubs, but you get the idea) http://www.yotatech.com/f116/find-li...ry-day-156896/ good luck! __________________ 91 PU, 4wd, manual, 22re, .30-over, engnbldr RV head and 261 cam, MC 1200lbs clutch, misc LCE, engnbldr, and MC parts and HW, Pacesetter header and exhaust kit, Rancho UCA's , 4Crawler 1" diff and sway bar drop and 1.5" BJ spacers, WabFab 3.5" shackles, 31x10.5 pavement-pounding ATs on ProComp Extreme Alloys, misc SR5 interior goodies swapped in, 1000watt stereo system MySpace