We have had some nasty weather here in Oregon over the last couple of weeks so I have been in 4WD more than usual. When my hubs are locked I'm occasionally hearing a squeal coming from the drivers side, which leads me to believe my driver's side hub may need rebuilding. Using the search feature I came across this link:
http://forum.ih8mud.com/79-95-toyota...b-rebuild.html, which looks to be a pretty good write-up of the job. In terms of tools it looks like I will need a good set of snap ring pliers and a brass drift for the cone washers. What is a good source for new gaskets for these hubs? Also, for those of you who have done this job, how extensive is it and any suggestion to make things easier. Thanks!