YotaTech Forums - View Single Post

James Dean · 12-14-2008, 06:27 AM

I made a receiver mount so I could move my wench cradle or other accessories to be in the front or rear. I know it's overkill but it's attatched at all 10 locations in the frame. I also added a tranny cooler because this blocks the lower tank of the radiator where the stock cooler is. I normally just keep a tow link in it, except for when I go wheelin. Last pic shows with my bumpers powder coated hammertone black and cleared.

12-14-2008, 06:27 AM	#13 (permalink)
James Dean Contributing Member Join Date: Nov 2005 Location: Tucson, AZ Posts: 583	I made a receiver mount so I could move my wench cradle or other accessories to be in the front or rear. I know it's overkill but it's attatched at all 10 locations in the frame. I also added a tranny cooler because this blocks the lower tank of the radiator where the stock cooler is. I normally just keep a tow link in it, except for when I go wheelin. Last pic shows with my bumpers powder coated hammertone black and cleared. __________________ Custom painter and Toyota Stripe and decal supplier. http://jamesdeancreations.com Custom Safari and Crawlin accessories. http://www.jamesdeancreations.com/4runner_project.htm