YotaTech Forums - View Single Post

Elvota · 11-27-2008, 10:08 AM

Just brainstorming.... but what about an angle grinder to the body of the current arm? Might cut a few deep slots and help relieve the pressure. Would be difficult not to go all the way down to the splines... but if you are looking at getting a new box anyway you don't have much to loose.

11-27-2008, 10:08 AM	#55 (permalink)
Elvota Contributing Member Join Date: Jun 2005 Location: Phx, AZ Posts: 3,436	Just brainstorming.... but what about an angle grinder to the body of the current arm? Might cut a few deep slots and help relieve the pressure. Would be difficult not to go all the way down to the splines... but if you are looking at getting a new box anyway you don't have much to loose. __________________ ================ 1990 4Runner \| V6 3.4 \| 5spd \| 240 someoddthousand miles \| SR5 \| SAS \| RLS \| 35's \| ARB \| TJM \| 217 to 1 \| W8000 - four wheels \| three sticks \| two hands \| one trail - RIGITY DIGITY visit the sticki chronicles