|
Wiring the relays is quite easy.
First where you put it is not a big deal, i put it in the car due to that way when i wash my engine they won't get wet. And it is easy to wire it in the car, you just have to get down in the floor board of the drivers side lol. But either way will work.
Now for how to wire it up. Read those links. I used the cigeret lighter wire as the ingnition switched power source. Tap that wire and then run it to the relays. Ground the other side of the cold side.
Then on the hot side connect the 12v+ to one and the wire to the heaters to the other. Those links will explain where the wires go.
As for your question, i would just use the cigeret lighter and the igntion wire switch. Works perfect for me.
__________________
Just call me TA
2000 Toyota 4runner Limited 3.4l V6 Auto SUPERCHARGED, URD 7th, 2.2 pulley, Doug Thorley Headers - My truck
All the Mods that can be done to 3rd Gens Thread
My thoughts on Gun control summed up quite nice:
Quote:
Originally Posted by sdstud212001
Guns kill people like spoons make people fat
|
Quote:
Originally Posted by Dare44
Im a firm believer in the saying "If you outlaw guns, only the outlaws will have them"
|
“Gun control runs aground on this simple fact: people who would use guns to break laws would also break laws to use guns”
|