Hey everyone, Scuba here.
I tried searching, read like a bunch of thread, to no avail.
I got my lights all wired and mounted to the best of my ability.
Only thing is, im having trouble getting them both to come on.
Couple questions.
Call me stupid, but on a switch that looks similar to this, The line would be the on position...Correct ?
Now if thats true, there are 3 prongs going to it, the bottom one, or the one closest to off, should be ground...yay..nae ?
Moving on..I'd like to be able to turn the lights on independent of the factory headlights, thus being said, im tapping into the 12v's from my radio to my amp for the power to the switch...
As for the switch,
If the ground is supposed to be on the bottom, Im having trouble trying to figure out which wire goes where...
Heres a very crude example...
The wire that goes to the relay...should go on top...or in the middle..same question for the one that goes from the radio 12V to the switch.
The other night i got one to come on...cant remember how it was wired, then last night the opposite one would come on...id like them both to come on...I know there are wiring gurus on here, or just people who have done this before, so tell me if im doing something wrong please.
P.S. Im using the switch and relay that came with the lights