YotaTech Forums - View Single Post

Elvota · 10-01-2008, 08:01 PM

I built an extension cord for my 220V when I was running the welder off the oven in the kitchen.

Yes, I used to slide the oven out and plug in my welder.

Anyway... there is a good chance it would work for you Mike if the plugs are the same. It would be easy enough for you to by different end(s) if needed. It's the wire itself that's the spendy part.

10-01-2008, 08:01 PM	#15 (permalink)
Elvota Contributing Member Join Date: Jun 2005 Location: Phx, AZ Posts: 3,436	I built an extension cord for my 220V when I was running the welder off the oven in the kitchen. Yes, I used to slide the oven out and plug in my welder. Anyway... there is a good chance it would work for you Mike if the plugs are the same. It would be easy enough for you to by different end(s) if needed. It's the wire itself that's the spendy part. __________________ ================ 1990 4Runner \| V6 3.4 \| 5spd \| 240 someoddthousand miles \| SR5 \| SAS \| RLS \| 35's \| ARB \| TJM \| 217 to 1 \| W8000 - four wheels \| three sticks \| two hands \| one trail - RIGITY DIGITY visit the sticki chronicles