YotaTech Forums - View Single Post

wardriver · 08-30-2008, 10:04 AM

I'm trying to run all the gremlin's out after my head gasket fix. I'm down to my last one. My AC will not cut the compressor on - the light comes on in the dash (which really doesn't mean anything). Things I know - the fuses behind the glove box are good, I did not discharge/unhook or mess with the AC unit in any way other than the belt, when it should engage (ac on, fan blowing, engine running) the wire that engages the electric clutch only reads 0 volts.

I'm at a loss here - any help would be appreciated.

08-30-2008, 10:04 AM	#1 (permalink)
wardriver Registered User Join Date: Jul 2007 Location: 26.3 road miles from the AT (VA) Posts: 319	No AC after HG fix? I'm trying to run all the gremlin's out after my head gasket fix. I'm down to my last one. My AC will not cut the compressor on - the light comes on in the dash (which really doesn't mean anything). Things I know - the fuses behind the glove box are good, I did not discharge/unhook or mess with the AC unit in any way other than the belt, when it should engage (ac on, fan blowing, engine running) the wire that engages the electric clutch only reads 0 volts. I'm at a loss here - any help would be appreciated. __________________ Current Toyota -95' 4Runner - 3.0/AT - New HG - Yakima Rack - MT's - Hella's - GPS- Sat Radio - Onboard 120V Former Toyotas - 81' Trekker- 70' FJ40 - 76' FJ40 -72 FJ40 - 85 Hilux (ZERO options) Laptop CarPC Switch Mod \| DC to AC Inverter Switch Mod Staff Mod for nHunting.com a community forum for hunting/fishing/shooting Last edited by wardriver; 08-30-2008 at 12:12 PM.