YotaTech Forums - View Single Post - maintaining high RPMs with 22R-E
Thread: maintaining high RPMs with 22R-E
View Single Post
Old 08-12-2008, 09:12 PM   #4 (permalink)
TOYOTA 1
Registered User
 
TOYOTA 1's Avatar
 
Join Date: Feb 2008
Location: oregon
Posts: 2,319
Quote:
Originally Posted by James View Post
I wouldn't recommend it. The valve train is weak in these motors. I know first hand with my FWD Prue-runner. I used beat the living piss out of it. I have personally took it to 7500 many times. Why? Because I did not care and I was bored. Well the head gasket went and I pulled the head and sent it out to the machine shop. The valve seats were hammered so they had to install new valve seat and redo the valves.

James
? what motor were you reving that high?

any stock Toyota truck motor that has factory Efi will never see above 6,250 RPM. they have rev-limiter that wont allow it.

as for the op, as long as its not a high mileage motor you will be fine.
__________________
91 Toyota "built not bought"

Quote:
Originally Posted by BigBluePile View Post
I just bought a Toyota and I don't have any tools or any kind of area to work on it with and I'm wanting to drop in a V8 and clear 38's but I don't have any money and do I need to lift this if so what kind of lift and what do you recommend also I'm not sure if all terrains will work in mud is there another kind I have some rims that should work but they came off a yugo so is the bolt pattern the same...
Last edited by TOYOTA 1; 08-22-2008 at 06:53 PM.
TOYOTA 1 is offline   Reply With Quote