YotaTech Forums - View Single Post

mt_goat · 06-30-2008, 07:28 PM

I made a support bracket for the down pipe today. There have been a few guys having problems cracking the crossover so I wanted to help support it and hopefully avoid that problem. Toyota has the down pipe supported in this area from the factory so maybe they know best. In fact I made this bracket from an old factory bracket.

06-30-2008, 07:28 PM	#700 (permalink)
mt_goat Contributing Member Join Date: Nov 2002 Location: Oklahoma State Posts: 8,919	I made a support bracket for the down pipe today. There have been a few guys having problems cracking the crossover so I wanted to help support it and hopefully avoid that problem. Toyota has the down pipe supported in this area from the factory so maybe they know best. In fact I made this bracket from an old factory bracket. __________________ ~Dale~ 93 4X4 ext-cab, auto, SR5, 3.4 V6, supercharged, 2.1" pulley, URD fuel mods, Aquamist WI, IPT valve body mod, dual cases, 4" superlift front, Alcan springs rear, 33 BFG MT, ARB locked front & rear, 5.29 US Gears, RB 1" Body Lift, 1.5" ball joint spacers, manual hubs, TJM T-17, Warn m8000. Last edited by mt_goat; 06-30-2008 at 07:30 PM.