YotaTech Forums - View Single Post

4Crawler · 06-04-2008, 06:25 PM

Some ideas:
- http://www.4crawler.com/4x4/CheapTri...eWasherRemoval

And note that I have never run into one technique that will work with every single cone washer. All depends on what it holding it tight. So if you try one technique and get say 4 of the washer off, but 2 won't budge. Try something else on them. I have had some that literally fly off with the slightest tap of a hammer and others that are stuck on the stud and no amount of hammering will make them move.

06-04-2008, 06:25 PM	#4 (permalink)
4Crawler Contributing Member Join Date: Jun 2002 Location: SF Bay Area, CA Posts: 6,462	Some ideas: - http://www.4crawler.com/4x4/CheapTri...eWasherRemoval And note that I have never run into one technique that will work with every single cone washer. All depends on what it holding it tight. So if you try one technique and get say 4 of the washer off, but 2 won't budge. Try something else on them. I have had some that literally fly off with the slightest tap of a hammer and others that are stuck on the stud and no amount of hammering will make them move. __________________ 1985 Toyota 4Runner SR-5, 22REC engine, dual t-cases, 4.88 gears, dual ARBs, 33x10.50 BFGs. r.c.brown@ieee.org TruckEditor@tlca.org Project: 4Crawler 4Crawler OffRoad Gettin'Off 4WD Club Last edited by 4Crawler; 06-05-2008 at 07:45 AM.