04-29-2008, 12:35 PM
|
#4 (permalink)
|
|
Registered User
Join Date: May 2007
Location: Shoreline, Wa
Posts: 480
|
Quote:
Originally Posted by thook
I think CA vehicles are the only ones with gas temp. sensors, so see if yours has one. It would be on the side of the EGR valve body. If not, you should have a bimetal valve that controls the temperature at which valve is allowed to open. On the back of the upper intake manifold, I believe. It's been awhile since I've had to look at my 3.0 to fix anything, but I believe that's where it is.
The bimetal valve will have two, small vac lines going to it and a vent cap.....no electricals.
|
i do have that temp sensor on the side of the EGR valve. if one of those was to crap out, would that trip the code?
__________________
1994 toyota 4Runner SR5 Limited 4wd, 3.0 V-6 3vze, 5-speed, 31/10.50-15 toyo A/T, All Pro 1.5" coil springs, bilstein front shocks, doetsch tech mv12's rears, , MC heavy duty clutch
feasable wish list:
33x10.50 BFG KM2
4.88's
ARB air locker
other ride:2001 Honda XR400R
Quote:
Originally Posted by slisdexia
I blame the automatic transmission for the wussification of America
|
|
|
|