YotaTech Forums - View Single Post - Radio light out-searched high and low...

FCBuff · 04-09-2008, 08:48 AM

Pulled the radio out and disassembled it. If you remove the front black panel, it just has retention clips. There is a circuit board held by 6 very small screws. Remove the screws and the circuit board easily comes out. On the front side are multiple tiny lights attached to the board. I removed the one in the area of the display with a small slotted screw driver. I am going to an electrical supply store to see about getting a replacement. I will update again as I reach the next step. Hopefully It all goes well. I re-installed the radio for now and all is working as before, the LED station read out is still functional just not backlit, so removing the light does not effect things adversely.

04-09-2008, 08:48 AM	#8 (permalink)
FCBuff Registered User Join Date: Apr 2008 Location: Fort Collins CO Posts: 7	Update...tore into the radio Pulled the radio out and disassembled it. If you remove the front black panel, it just has retention clips. There is a circuit board held by 6 very small screws. Remove the screws and the circuit board easily comes out. On the front side are multiple tiny lights attached to the board. I removed the one in the area of the display with a small slotted screw driver. I am going to an electrical supply store to see about getting a replacement. I will update again as I reach the next step. Hopefully It all goes well. I re-installed the radio for now and all is working as before, the LED station read out is still functional just not backlit, so removing the light does not effect things adversely.