Rock Slide

Got my 1” Body Lift installed a couple weeks ago at WabFab Off Road. Purchased the BL itself from WabFab and purchased the steering extension from 4Crawler Off Road.

I also took a page out of Steve’s book at Sonoran Steel and installed a set of rear fender liners to cover the gap created by the BL . I then sprayed undercoating over the liners and the wheel wells to make every thing blend together. More info on what Steve did can be found here: Click Me.

I’m very pleased with the overall results of the BL and Fender Liners . Pictures below:




Body Lift and Steering Extension:






Before:










Body Lift Installed:











Steering Extension Installed:






Here’s some info on the rear fender liners that I used to cover the gap created by the BL:

- Wheel House Seals (2), Part No. 65675-89111
- Clips (9), Part No. 90467-A0003

These Liners have 5 holes in each. I had to create an extra hole on the passenger side fender…so I used a total of 6 clips on that one. However, for the driver side fender, I only used 3 clips. I used 2 existing clips that hold the gas tank filler cover to the body.



Fender Liners





Clips:







Rear Driver Side Body Gap:






Rear Driver Side After Liners Installed:






Passenger Side Body Gap with New Holes Drilled:






Passenger Side After Liners Installed:






One Last Picture for Good Measure:






**

__________________
2002 4Runner Sport 4WD

My 4Runner Profile

Accessories: SS 7.1 Lift Kit, WabFab 1" BL, TJM T15, Stubb Sliders, FX/TSX HID Headlight Retrofit, 1st Gen Rollbar, Tundra Brake Upgrade, Hilux Surf Field Monitor, TRD I.S. Wheels, Nitto TG 265/75s, Hella HID 4000s, Tint, Black Pearl Emblems, Clear Corners, TRD Decals, JBL Door Speakers

Mods: Disabled DRLs, Disabled Keyless Entry Chirp, Disabled VTRAC/VSC/ABS, Fog Light Mod, Air Elbow Mod, Ashtray Mod, Mud Flap Mod, Rear Diff Breather Mod