YotaTech Forums - View Single Post

4Crawler · 10-29-2007, 01:29 PM

That would be spring hangers. The perches are the parts that weld to the top of the axle for the springs to sit on. I know folks have made Chevy hangers on their own, should be information on the Chevy spring FAQ on the Pirtate4x4.com forum. I think that 3.5" square tubing (0.250 wall) is used for the hanger, makes 3" inside width.

10-29-2007, 01:29 PM	#6 (permalink)
4Crawler Contributing Member Join Date: Jun 2002 Location: SF Bay Area, CA Posts: 7,832	That would be spring hangers. The perches are the parts that weld to the top of the axle for the springs to sit on. I know folks have made Chevy hangers on their own, should be information on the Chevy spring FAQ on the Pirtate4x4.com forum. I think that 3.5" square tubing (0.250 wall) is used for the hanger, makes 3" inside width. __________________ 1985 Toyota 4Runner SR-5, 22REC engine, dual t-cases, 4.88 gears, dual ARBs, 33x10.50 BFGs or 35x12.50 MTRs r.c.brown@ieee.org TruckEditor@tlca.org Project: 4Crawler 4Crawler OffRoad Gettin'Off 4WD Club