friend's ex...
anyways, update for the day: flywheel and Marlin clutch are in, manual trans is in, starter is in, pedals are mounted, and master is mounted. had to order a new mount from work (Napa) since the first one i got was wrong, so once that's here i can bolt everything up for good. gotta pick up some hardlines and run those, get the wiring sorted out, trim the floor for shifters, bleed the clutch, fill up the trans and t-case, and possibly pull the axle forward an inch on the perches. later on i'll get the console all figured out and looking nice again, not really an issue right now. only took a few pics... gotta get my camera working and i'll post them up.
by the way, here are few sites i used for info on the swap... might help others in the future.
http://bbs.off-road.com/ubbthreads/s...ue#Post1262965
http://www.yotatech.com/f116/2nd-gen...on-swap-79842/
http://www.yotatech.com/f116/so-begi...-runner-82939/