|
not to say this is the cause, but yesterday when workin on a friends Buick Park Avenue which had no brakes we went and got a nice old master cyl from the scrap yard bolted it on and started to bleed it when we then found a line now that had a pin hole and was sucking air in. with the old master cylinder on i guess there was air in the line and wasnt making this line under pressure and the new one made it, anyways, it was now pissing brake fluid out this leak where before it wasnt. old master cylinder put back on now works fine and makes this line piss fluid before.
was similar to brakes would go to the floor, could get them to lock up back tires but not the fronts, but wasnt losing any fluids at all. replaced front line, and now everythings ok.
try bleeding the system from brake lines and not the bleeders. it should shoot out pretty good if theres on thats weak look for symptom there. also if it is m/c you might want to change the booster as im not sure if the yotas will but some vehicles will suck the brake fluid into the booster.
jeff
|