YotaTech Forums - View Single Post

4Crawler · 04-04-2007, 08:04 PM

Yep, clutch switch then vacuum, then check the ground connection, mine was down next the the CC module at the main cab ground point. Make sure the connector is on solid and if that is all OK, check the troubleshooting procedures in a Factory Service Manual.

04-04-2007, 08:04 PM	#3 (permalink)
4Crawler Contributing Member Join Date: Jun 2002 Location: SF Bay Area, CA Posts: 7,832	Yep, clutch switch then vacuum, then check the ground connection, mine was down next the the CC module at the main cab ground point. Make sure the connector is on solid and if that is all OK, check the troubleshooting procedures in a Factory Service Manual. __________________ 1985 Toyota 4Runner SR-5, 22REC engine, dual t-cases, 4.88 gears, dual ARBs, 33x10.50 BFGs or 35x12.50 MTRs r.c.brown@ieee.org TruckEditor@tlca.org Project: 4Crawler 4Crawler OffRoad Gettin'Off 4WD Club