Quote:
Originally Posted by TRDatVT
PS: Is there a special tool to press the new ball joint in and do I HAVE to take the UCA off to do it?
|
I didn't pull the UCA but I did pull the spindle off completely...easier to work with. After that I used a really big vice w/ cheater bar and a piece of tube that fit right around the base of the ball joint. Pressed it out and then pressed back in. Just take your time and make sure it goes in straight.
__________________
Lance
2001 4Runner Limited 4X4 -- 315/75R16 MT/Rs | MT Classic IIs | Dual ARBs/4.88s | (F) 5125/Tundra Coils (R) 5125/LC Coils | 4Crawler 1.5" BL | Aisin Manual Hubs | Slee Sliders | Sonoran Steel Rear Bumper | TJM T-15 w/ Warn M8000
2004 Land Cruiser -- OME Medium Lift | Nitto Terra Grapplers
|