Quote:
Originally Posted by 4Crawler
Two reasons I chose not to use the PCV hose was #1 it is too short to fit into the can and #2 it would be too hard to control the flow of the Seafoam, since it such a large diameter tube. I even found the small 3mm ID purge line would suck in too much Seafoam at a time unless I regulated the flow.
|
you dont stick any vacuum hose in the seafoam! you tilt the can of seafoam and let the vacuum hose suck it out that way and have a rag for it bc it can get messy.. but dont stick the hose in the can