Quote:
Originally Posted by JEBSR5
Tried this approach today. What a difference. I will attest that I definately had it adjusted right. Checked before changing anything and all specs were right on. With that in mind, loosened screws and adjusted knife edge and bingo. Works much better now. I have no idea what this indicates as far as being correctly adjusted according to OHM's, but being much better with knife edge motor running adjustment, unless OHM meter is way off.
|
It would be of some interest to see what the measurements are set to now. I'm sure they are VERY close to the spec method of setting the adjustment.
Could have made that check myself, but frankly, once I'd done the adjustement this simple way, and it worked, I didn't care what the "spec" said. The idea came from buying a working inexpensive TPS and understanding how it works and what it does.
Mine continues to work just fine, after 8 months or so.