YotaTech Forums - View Single Post - Installing a 1st gen rollbar in a 2nd gen

jsnby · 02-20-2007, 04:43 PM

marc....i just fit one in mine this last week...i cut 2.25" off all 4 corners and welded a 1/8" piece of plate to the bottom of the legs for mounting tabs. No pics yet since I didn't have time to bolt it down yet. I'll get pics when it's done. it clears the plastic panels on the top of the cab by about 1/8"

02-20-2007, 04:43 PM	#27 (permalink)
jsnby Contributing Member Join Date: Nov 2005 Location: Glendale, CA Posts: 487	marc....i just fit one in mine this last week...i cut 2.25" off all 4 corners and welded a 1/8" piece of plate to the bottom of the legs for mounting tabs. No pics yet since I didn't have time to bolt it down yet. I'll get pics when it's done. it clears the plastic panels on the top of the cab by about 1/8" __________________ http://www.trek-planner.com 1992 Toyota 4Runner\|3.slow\|5spd, SR5\|Flowmaster 40\|SAS 5" f/r\|Detroit rear\|ARB front\|5.29's\|roof rack\|FLX 165\|35x12.5r15 BFG MT\|CB\|ISR\|Alarm\|BentUp Sliders\|C02\|30 spline longs