YotaTech Forums - View Single Post - Installing a 1st gen rollbar in a 2nd gen

Dublin · 02-18-2007, 05:30 PM

I started with 2" front and back, and I think after fitting 2 1/2" front 2 1/4" rear. Unlike the 3rd gens you won't be able to slide it in, I had to remove a side window to angle it in place. There's a couple good threads here you can find with this really cool button "search". good luck on your install.

http://www.yotatech.com/showthread.p...ollbar+2nd+gen

02-18-2007, 05:30 PM	#11 (permalink)
Dublin Contributing Member Join Date: Feb 2004 Location: Appleton, Wi. USA Posts: 884	I started with 2" front and back, and I think after fitting 2 1/2" front 2 1/4" rear. Unlike the 3rd gens you won't be able to slide it in, I had to remove a side window to angle it in place. There's a couple good threads here you can find with this really cool button "search". good luck on your install. http://www.yotatech.com/showthread.p...ollbar+2nd+gen __________________ 94 4Runner 4x4, V6 Auto, Outlaw II's with BFG 33x12.5x15 on stock suspension (no lift), Kenwood KDC-MVP Sirius/MP3 player, Bushwacker extenda-flares, 1700 watt power inverter, Air intake mod, Radio Shack CB, GPS, Swing arm tire carrier, modified 1st gen Toyota 4Runner Rollbar, Aisin manual hubs, 87 inclinometer, Toyota Brush guard. Where ever you go, there you are. I started out with nothing & still have most of it left. Last edited by Dublin; 02-18-2007 at 05:35 PM.